slEntPhysicalAdminStatus

SL-ENTITY-MIB · .1.3.6.1.4.1.4515.1.3.6.1.1.1.17
MIB view Table view

Object

column r/w Enumeration 
The desired state of the interface.  The testing(3)
state indicates that no operational packets can be
passed.  When a managed system initializes, all
interfaces start with ifAdminStatus in the down(2)
state.  As a result of either explicit management
action or per configuration information retained by
the managed system, ifAdminStatus is then changed to
either the up(1) or testing(3) states (or remains in
the down(2) state).
State warmBoot(4) cause the card a Warm Start.
The state coldBoot(5)has two meanings. If the card is present
it means to reinitialize it with the factory defaults. This
is equivalent to Cold Start. 
Setting the object to the value hotBoot(7) cause the
card to reboot in a non service affecting manner.
If the card is not present it means that the former
configuration of this slot is not longer kept in the
system. In this case the slot is ready for insertion of
a new card of any type.

Context

MIB
SL-ENTITY-MIB
OID
.1.3.6.1.4.1.4515.1.3.6.1.1.1.17
Type
column
Access
readwrite
Status
current
Parent
slEntPhysicalEntry
Table
slEntPhysicalTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1up
2down
3testing
4warmBoot
5coldBoot
7hotBoot

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slEntPhysicalIndex
The Slot number of the entity.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4515.1.3.6.1.1.1.1
slEntPhysicalProtectMode
The protection mode of physical entity. The default value is automatic(3) This object is not applicable should the protection be done on a per-port basis.
columnEnumeration.1.3.6.1.4.1.4515.1.3.6.1.1.1.14
slEntPhysicalStatus
The physical entity status bitmap: 1 - Card is removed from the slot 2 - Communication Fault 4 - Major alarm inherited from the ports 8 - Card or port HW fail…
columnInteger32.1.3.6.1.4.1.4515.1.3.6.1.1.1.15
slEntPhysicalFailureDescription
Text that describes the last entity failure.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.16
slEntPhysicalOperStatus
The current operational state of the interface. If slEntPhysicalAdminStatus is down(2) then slEntPhysicalOperStatus should be down(2). If slEntPhysicalAdminStatus is changed to…
columnEnumeration.1.3.6.1.4.1.4515.1.3.6.1.1.1.18
slEntPhysicalSysUptime
The number of timer ticks since the last reboot of the module.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4515.1.3.6.1.1.1.19
slEntPhysicalDescr
A textual description of physical entity. This object should contain a string which identifies the manufacturer's name for the physical entity, and should be set to a distinct va…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.2
slEntPhysicalType
The type of the physical module.
columnPhysicalType.1.3.6.1.4.1.4515.1.3.6.1.1.1.20
slEntPhysicalCleiCode
The Clei Code resides in the SEEP of each card.
columnCleiCode.1.3.6.1.4.1.4515.1.3.6.1.1.1.21
slEntPhysicalPartNumber
The card part number. This is a string of upto 12 characters.
columnOctetString.1.3.6.1.4.1.4515.1.3.6.1.1.1.22
slEntPhysicalOemSerialNum
The oem-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). …
columnOctetString.1.3.6.1.4.1.4515.1.3.6.1.1.1.23
slEntPhysicalProductionDate
The entity production date in the format YYYY-WW.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.24
slEntPhysicalSysTemp
Internally measured module temperature. The value 0 means -128 Celsuis. An increment on one is equivalent to 1/256 degree, yielding a total range of -128 to +128 Celsius.
columnInteger32.1.3.6.1.4.1.4515.1.3.6.1.1.1.25
slEntPhysicalSysAlias
The module alias as given by the user.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.26
slEntPhysicalSysSubType
The subtype of the physical module. The possibel values of this object are drived from the value of slEntPhysicalType.
columnInteger32.1.3.6.1.4.1.4515.1.3.6.1.1.1.27
slEntPhysicalClass
An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indicates…
columnPhysicalClass.1.3.6.1.4.1.4515.1.3.6.1.1.1.3
slEntPhysicalHardwareRev
The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.4
slEntPhysicalFirmwareRev
The vendor-specific firmware revision string for the physical entity (normally the boot-revision). Note that if revision information is stored internally in a non-p…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.5
slEntPhysicalSoftwareRev
The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) forma…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.4515.1.3.6.1.1.1.6
slEntPhysicalSerialNum
The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). …
columnOctetString.1.3.6.1.4.1.4515.1.3.6.1.1.1.7
slEntPhysicalProtectionEntity
The value of slEntPhysicalIndex for the physical entity which 'protects' this physical entity. A value of zero indicates this physical entity has no protecting physical entity. T…
columnPhysicalIndex.1.3.6.1.4.1.4515.1.3.6.1.1.1.8
slEntPhysicalProtectState
The protection state of physical entity. This object is not applicable should the protection be done on a per-port basis. In the case of Switch protection the following logic shou…
columnEnumeration.1.3.6.1.4.1.4515.1.3.6.1.1.1.9