slEntPhysicalHardwareRev
SL-ENTITY-MIB ·
.1.3.6.1.4.1.4515.1.3.6.1.1.1.4
Object
column
SNMP-FRAMEWORK-MIBSnmpAdminString
The vendor-specific hardware revision string for the
physical entity. The preferred value is the hardware
revision identifier actually printed on the component itself
(if present).
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format, in an
implementation-specific manner.
If no specific hardware revision string is associated with
the physical component, or this information is unknown to
the agent, then this object will contain a zero-length
string.
Context
- MIB
- SL-ENTITY-MIB
- OID
.1.3.6.1.4.1.4515.1.3.6.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- slEntPhysicalEntry
- Table
- slEntPhysicalTable
- Siblings
- 22
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slEntPhysicalIndex The Slot number of the entity. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4515.1.3.6.1.1.1.1 |
| slEntPhysicalProtectMode The protection mode of physical entity.
The default value is automatic(3)
This object is not applicable should the protection be done
on a per-port basis. | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.14 |
| slEntPhysicalStatus The physical entity status bitmap:
1 - Card is removed from the slot
2 - Communication Fault
4 - Major alarm inherited from the ports
8 - Card or port HW fail… | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.15 |
| slEntPhysicalFailureDescription Text that describes the last entity failure. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.16 |
| slEntPhysicalAdminStatus The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdmi… | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.17 |
| slEntPhysicalOperStatus The current operational state of the interface.
If slEntPhysicalAdminStatus is down(2) then
slEntPhysicalOperStatus should be down(2).
If slEntPhysicalAdminStatus is changed to… | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.18 |
| slEntPhysicalSysUptime The number of timer ticks since the last reboot of the module. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4515.1.3.6.1.1.1.19 |
| slEntPhysicalDescr A textual description of physical entity. This object
should contain a string which identifies the manufacturer's
name for the physical entity, and should be set to a
distinct va… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.2 |
| slEntPhysicalType The type of the physical module. | column | PhysicalType | .1.3.6.1.4.1.4515.1.3.6.1.1.1.20 |
| slEntPhysicalCleiCode The Clei Code resides in the SEEP of each card. | column | CleiCode | .1.3.6.1.4.1.4515.1.3.6.1.1.1.21 |
| slEntPhysicalPartNumber The card part number. This is a string of upto 12 characters. | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.22 |
| slEntPhysicalOemSerialNum The oem-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
… | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.23 |
| slEntPhysicalProductionDate The entity production date in the format YYYY-WW. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.24 |
| slEntPhysicalSysTemp Internally measured module temperature. The value 0 means -128 Celsuis.
An increment on one is equivalent to 1/256 degree,
yielding a total range of -128 to +128 Celsius. | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.25 |
| slEntPhysicalSysAlias The module alias as given by the user. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.26 |
| slEntPhysicalSysSubType The subtype of the physical module.
The possibel values of this object are drived from the value of slEntPhysicalType. | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.27 |
| slEntPhysicalClass An indication of the general hardware type of the physical
entity.
An agent should set this object to the standard enumeration
value which most accurately indicates… | column | PhysicalClass | .1.3.6.1.4.1.4515.1.3.6.1.1.1.3 |
| slEntPhysicalFirmwareRev The vendor-specific firmware revision string for the
physical entity (normally the boot-revision).
Note that if revision information is stored internally in a
non-p… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.5 |
| slEntPhysicalSoftwareRev The vendor-specific software revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) forma… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.6 |
| slEntPhysicalSerialNum The vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
… | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.7 |
| slEntPhysicalProtectionEntity The value of slEntPhysicalIndex for the physical entity which
'protects' this physical entity. A value of zero indicates
this physical entity has no protecting physical
entity.
T… | column | PhysicalIndex | .1.3.6.1.4.1.4515.1.3.6.1.1.1.8 |
| slEntPhysicalProtectState The protection state of physical entity.
This object is not applicable should the protection be done
on a per-port basis.
In the case of Switch protection the following logic shou… | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.9 |