channelSpacingSelection
SIAE-RADIO-SYSTEM-MIB ·
.1.3.6.1.4.1.3373.1103.80.89
Object
scalar
r/w
Bits
his object selects which channel spacings the radio link has to
support:
- etsi: Compliant with European Telecommunication Standards
Institute
- fcc: Compliant with Federal Communications Commission
Context
- MIB
- SIAE-RADIO-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3373.1103.80.89- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- radioSystem
- Siblings
- 82
Syntax
Bits
Values & Constraints
Enumerated Values
0 | etsi |
1 | fcc |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radioSystemMibVersion Numerical version of this module.
The string version of this MIB have the following format:
XX.YY.ZZ
so, for example, the value 1 should be interpreted as 00.00.01
and the valu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.1 |
| tdmSettingsTable Table with tdm settings entries. | table | - | .1.3.6.1.4.1.3373.1103.80.10 |
| radioCapabilitiesTable Table with RadioCapabilities entries: there is an entry for each
radioTable rows. | table | - | .1.3.6.1.4.1.3373.1103.80.11 |
| radioStatusTable Table with RadioStatus records: one record for 1+0 configuration and
two record for 1+1 configuration. | table | - | .1.3.6.1.4.1.3373.1103.80.12 |
| radioMaintTable Table with Command for maintenance of radio branch.
Objects in this table is not persistent. An Instance of this
table is created on creation of radioBranchEntry | table | - | .1.3.6.1.4.1.3373.1103.80.13 |
| radioFrequencyTable Availables channels for selected channel spacing and modulation
(see leaf radioFreqTableSelection). | table | - | .1.3.6.1.4.1.3373.1103.80.14 |
| radioDuplexFrequencyTable Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency. | table | - | .1.3.6.1.4.1.3373.1103.80.15 |
| radioModulationTable List of modulations related to channel spacing. | table | - | .1.3.6.1.4.1.3373.1103.80.16 |
| linkStatusTable Table with LinkStatusEntry. | table | - | .1.3.6.1.4.1.3373.1103.80.17 |
| linkTfcTable deprecated Transmitter Fail Check feature. In 1+1 HS configuration, the
radio terminal that doesn't receive signals on both receivers,
requests the remote transmitter switch.
This… | table | - | .1.3.6.1.4.1.3373.1103.80.18 |
| linkMaintTable Table with commands for maintenance of radio link.
Objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry | table | - | .1.3.6.1.4.1.3373.1103.80.19 |
| radioTable A list of radio interface entries. This table is useful
to show the manager all the available radio interfaces
on the equipment. Moreover it is a reference for
Performance Moni… | table | - | .1.3.6.1.4.1.3373.1103.80.2 |
| linkBerTable Table with Command to estimate BER of radio equipment.
Every objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry | table | - | .1.3.6.1.4.1.3373.1103.80.20 |
| linkAcmTable Table with link records. | table | - | .1.3.6.1.4.1.3373.1103.80.21 |
| linkProTable deprecated A list of protection link entries.
This table was deprecated and replaced by linkProV2Table.
It is a view of the rows of the linkProV2Table with the same
linkIndex and … | table | - | .1.3.6.1.4.1.3373.1103.80.22 |
| linkProMaintTable deprecated A list of maintenance commands for protected links.
A row in this table is added on creation of a row
in linkProTable.
This table was deprecated and replaced by linkPro… | table | - | .1.3.6.1.4.1.3373.1103.80.23 |
| linkCapabilitiesTable deprecated Table with RadioCapabilities entries: there is an entry for each
linkTable row.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
In 1+1 F… | table | - | .1.3.6.1.4.1.3373.1103.80.24 |
| linkFrequencyTable deprecated Availables channels for selected channel spacing and modulation
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
In 1+1 FD radio link, ma… | table | - | .1.3.6.1.4.1.3373.1103.80.25 |
| linkDuplexFrequencyTable deprecated Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
In 1+1 HS and XPIC radio links, this table contains only… | table | - | .1.3.6.1.4.1.3373.1103.80.26 |
| linkModulationTable List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios. | table | - | .1.3.6.1.4.1.3373.1103.80.27 |
| combinedRadioCapabilitiesTable Table with RadioCapabilities entries: there is an entry for each
radioSettingTable row.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios b… | table | - | .1.3.6.1.4.1.3373.1103.80.28 |
| combinedRadioFrequencyTable Availables channels for selected channel spacing and modulation
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios. | table | - | .1.3.6.1.4.1.3373.1103.80.29 |
| xpicTable A list of xpic radio interface entries. If a manager
wants to make an xpic link, it should only add a
particular xpic radio interface to an xpic link. | table | - | .1.3.6.1.4.1.3373.1103.80.3 |
| combinedRadioDuplexFrequencyTable Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
In 1+1 HS and XPIC radio links, this table contains only… | table | - | .1.3.6.1.4.1.3373.1103.80.30 |
| combinedRadioPowerScalingTable List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios. | table | - | .1.3.6.1.4.1.3373.1103.80.31 |
| stm1BulkMappingTable Table with entries containing stm-1 bulk transport parameters
for a particular link.
For each link are present as many rows as the STM-1 that the link
can carry in bulk mode. | table | - | .1.3.6.1.4.1.3373.1103.80.32 |
| linkE1vsSTM1CapacityTable Table with entries containing the E1 cpacity according to the
tributaries STM-1 configured to be carried in bulk mode. | table | - | .1.3.6.1.4.1.3373.1103.80.33 |
| linkTfcV2Table Transmitter Fail Check feature. In 1+1 HS configuration, the
radio terminal that doesn't receive signals on both receivers,
requests the remote transmitter switch. | table | - | .1.3.6.1.4.1.3373.1103.80.34 |
| linkProV2Table A list of protection link entries. | table | - | .1.3.6.1.4.1.3373.1103.80.35 |
| linkProMaintV2Table A list of maintenance commands for protected links.
A row in this table is added on creation of a row
in linkProV2Table. | table | - | .1.3.6.1.4.1.3373.1103.80.36 |
| sspTable A list of operative and administrative set of parameters.
This table holds three row for every link (and its polarizations)
configured in the NE:
1) administative parameters of l… | table | - | .1.3.6.1.4.1.3373.1103.80.37 |
| radioLoopCapabilityTable This table shows which group a radio loop belongs to.
Radios with the same group number (identifier) close loop
simultaneously. | table | - | .1.3.6.1.4.1.3373.1103.80.38 |
| radioRxBerThresholdTable This table shows the nominal and measured values of RX power
at a bit error rate (BER) equal to 10e-6. | table | - | .1.3.6.1.4.1.3373.1103.80.39 |
| xpicChTable A list of xpic channel entries. This table maps
each xpic radio in respective xpic radio interface. | table | - | .1.3.6.1.4.1.3373.1103.80.4 |
| radioEchoCancelerTable Table with radio settings entries for Echo Canceler procedure. | table | - | .1.3.6.1.4.1.3373.1103.80.40 |
| linkAvailableIndex Shows an index which is available for creation of a new link
in the system. It shows the smallest available index.
Any attempt to create a link with a different index results
in a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.5 |
| radioRemDemodulatorFailAlarmSeverityCode Defines the severity associated to the radioRemDemodulatorFailAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.50 |
| radioRxActiveStatusTrapNotification Enable/disables (statusTrapEnable or statusTrapDisable) the trap
generation on status change event for radioRxActivestatus | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.51 |
| radioTxActiveStatusTrapNotification Define the severity associated to the radioTxActivestatus and
enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.52 |
| radioCableOpenAlarmSeverityCode Defines the severity associated to the radioCableOpen
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.53 |
| radioCableShortAlarmSeverityCode Defines the severity associated to the radioCableShort
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.54 |
| radioInvalidFrequencyAlarmSeverityCode Defines the severity associated to the radioInvalidFrequencyAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.55 |
| radioBaseBandRxAlarmSeverityCode Defines the severity associated to the radioBaseBandRxAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.56 |
| radioModulatorFailAlarmSeverityCode Defines the severity associated to the radioModulatorFailAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.57 |
| radioDemodulatorFailAlarmSeverityCode Defines the severity associated to the radioDemodulatorFailAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.58 |
| radioRxPowerLowAlarmSeverityCode Defines the severity associated to the radioRxPowerLowAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.59 |
| linkTable A list of link entries. | table | - | .1.3.6.1.4.1.3373.1103.80.6 |
| radioTxPowerLowAlarmSeverityCode Defines the severity associated to the radioTxPowerLowAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.60 |
| radioVcoFailAlarmSeverityCode Defines the severity associated to the radioVcoFailAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.61 |
| radioRxIFAgcAlarmSeverityCode Defines the severity associated to the radioRxIFAgcAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.62 |
| radioTxIFAgcAlarmSeverityCode Defines the severity associated to the radioTxIFAgcAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.63 |
| radioIduOduCommunicationAlarmSeverityCode Define the severity associated to the radioIduOduCommunicationAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.64 |
| radioOduIduCommunicationAlarmSeverityCode Define the severity associated to the radioOduIduCommunicationAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.65 |
| radioLocalOduAlarmSynthesisSeverityCode Define the severity associated to the radioLocalOduAlarmSynthesis
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.66 |
| radioRemoteOduAlarmSynthesisSeverityCode Define the severity associated to the radioRemoteOduAlarmSynthesis
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.67 |
| radioConfigMismatchAlarmSeverityCode Defines the severity associated to the radioConfigMismatchAlarm
and enables/disables the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.68 |
| radioPrxHysteresisValue Defines the delta value associated to the radioPrx before
having a new trap generation (radioPtxChange TRAP).
The zero value is not allowed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.69 |
| linkChTable A list of link channel entries. | table | - | .1.3.6.1.4.1.3373.1103.80.7 |
| radioPtxHysteresisValue Defines the delta value associated to the radioPtx before
having a new trap generation (radioPtxChange TRAP).
The zero value is not allowed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.70 |
| radioPrxHysteresisValueTrapNotification Enables/disables the Rx change trap generation on status change
event. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.71 |
| radioPtxHysteresisValueTrapNotification Enables/disables the Tx change trap generation on status change
event. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.72 |
| radioRxQualityLowAlarmSeverityCode Define the severity associated to the radioRxQualityLowAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.73 |
| radioRxQualityWarningAlarmSeverityCode Define the severity associated to the radioRxQualityWarningAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.74 |
| linkReducedCapacityAlarmSeverityCode Define the severity associated to the linkReducedCapacityAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.75 |
| linkLinkTelemetryFailAlarmSeverityCode Define the severity associated to the linkLinkTelemetryFailAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.76 |
| linkIdMismatchAlarmSeverityCode Define the severity associated to the linkIdMismatchAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.77 |
| linkRadioEocAlarmSeverityCode Define the severity associated to the linkRadioEocAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.78 |
| linkSetupMismatchAlarmSeverityCode Define the severity associated to the linkSetupMismatchAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.79 |
| linkSettingsTable Table with link settings entries. This table contains all
parameters of a radio frequency link. The content of this
table can be changed by a manager if linkRowStatus is
notInSer… | table | - | .1.3.6.1.4.1.3373.1103.80.8 |
| linkRescueSetupAlarmSeverityCode Define the severity associated to the linkRescueSetupAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.80 |
| linkXpicProcedureBlockAlarmSeverityCode Define the severity associated to the linkXpicProcedureBlockAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.81 |
| linkXpicRemTxOffAlarmAlarmSeverityCode Define the severity associated to the linkXpicRemTxOffAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.82 |
| linkLocalIduAlarmSynthesis Synthesis of the local IDU alarms | scalar | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.83 |
| linkLocalIduAlarmSynthesisSeverityCode Define the severity associated to the linkLocalIduAlarmSynthesis
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.84 |
| linkRemoteIduAlarmSynthesisSeverityCode Define the severity associated to the linkLocalIduAlarmSynthesis
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.85 |
| linkTfcAlarmSeverityCode Define the severity associated to the linkTfcV2Alarm (linkTfcAlarm)
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.86 |
| linkBerSyncLossAlarmSeverityCode Define the severity associated to the linkBerSyncLossAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.87 |
| linkNotMatchingRadiosAlarmSeverityCode Define the severity associated to the linkNotMatchingRadiosAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.88 |
| radioSettingsTable Table with radio settings entries. This table contains all
parameters of a radio terminal. The content of this table
can be changed only linkRowStatus is notInService(2) | table | - | .1.3.6.1.4.1.3373.1103.80.9 |
| fadeMarginMeasure Set by manager to start/stop fade margin measure.
This item is linked to a manual operation (ManOpRecord) instance. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.90 |
| linkConfigurationInProgressTrapNotification Enable/disables (statusTrapEnable or statusTrapDisable) the trap
generation on status change event for linkConfigurationInProgress | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.80.91 |
| radioXpicAlarmSeverityCode Define the severity associated to the radioXpicAlarm
and enable/disable the trap generation on status change event. | scalar | SIAE-ALARM-MIBAlarmSeverityCode | .1.3.6.1.4.1.3373.1103.80.92 |