genDeviceEntry

SCTE-HMS-GEN-MIB · .1.3.6.1.4.1.5591.1.6.2.1

Object

row mandatory

List of information about each generator being monitored.

Context

MIB: SCTE-HMS-GEN-MIB
OID: .1.3.6.1.4.1.5591.1.6.2.1
Type: row
Status: mandatory
Parent: genDeviceTable
Table: genDeviceTable
Children: 29

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
genDeviceAddress mandatory Index into the psDeviceTable. Address of Generator on the RS-485 Path	column	Integer32	`.1.3.6.1.4.1.5591.1.6.2.1.1`
genFuelOption mandatory Defines if low fuel detection is supported.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.10`
genVBatIgnitionOption mandatory Defines if engine ignition battery voltage is monitored.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.11`
genTempOption mandatory Defines if engine enclosure temperature is monitored.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.12`
genGeneratorStatus mandatory Defines the current state of generator operation. 1 = Off 2 = Running(test) 3 = Running 4 = Fail (A condition preventing the generator from functioning) …	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.13`
genGasHazard mandatory The concentration of hydrocarbon fuel in the generator enclosure has exceeded safe limits. Generator operation is suspended. The alarm is cleared when the sensor is reset via t…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.14`
genWaterIntrusion mandatory Water level within the generator or fuel enclosure has exceeded safe limits for generator operation. Generator operation is suspended while this alarm is active. The alarm is res…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.15`
genPadShear mandatory Indicates that the generator or fuel enclosure has shifted from its mounting position. Generator operation is suspended. The alarm is reset when the unit its returned to its orig…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.16`
genEnclosureDoor mandatory Indicates current status of the generator and/or auxiliary fuel enclosure door. This item requires entries in the discrete property table.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.17`
genCharger mandatory Indicates if the ignition battery charger is operating. This item requires entries in the discrete property table.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.18`
genFuel mandatory Indicates if the engine's fuel supply is sufficient for extended operation. Alarm is reset when fuel is replenished. This item requires entries in the discrete prop…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.19`
genProtocolVersion mandatory Version of the SCTE HMS protocol implemented in the monitored equipment. The 'Protocol Version' implementation will comply with the defined protocol in the SCTE 25-3 (formerly H…	column	Integer32	`.1.3.6.1.4.1.5591.1.6.2.1.2`
genVBatIgnition mandatory Scaled representation of the generator's ignition battery in 1/100 Volts. This item requires an entry in the property table.	column	Integer32	`.1.3.6.1.4.1.5591.1.6.2.1.20`
genEnclosureTemperature mandatory Temperature inside generator's enclosure in degrees C. This item requires an entry in the property table.	column	Integer32	`.1.3.6.1.4.1.5591.1.6.2.1.21`
genEquipmentControl optional When written, the appropriate corresponding command action is sent to the generator. 1 = End generator test 2 = Start generator test 3 = Reset latched generator ala…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.22`
genOilOption mandatory Defines if oil pressure is monitored.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.23`
genMinorAlarmSupport mandatory Defines if the minor alarm indicator is supported.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.24`
genMajorAlarmSupport mandatory Defines if the major alarm indicator is supported.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.25`
genOil optional Indicates if the engine's oil is adequate for safe operation. Alarm is reset when the condition returns to normal. This item requires entries in the discrete prope…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.26`
genMinorAlarm optional Indicates if the generator is indicating a minor alarm. The generator requires attention, but does not require an immediate visit to the generator. This item requir…	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.27`
genMajorAlarm optional Indicates if the generator is indicating a major alarm. The generator requires immediate attention, and should be visited immediately to remedy the situation. This …	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.28`
genVendorOID optional This object provides a means for a vendor to point to a vendor specific extension of this MIB.	column	ObjectIdentifier	`.1.3.6.1.4.1.5591.1.6.2.1.29`
genSoftwareVersion mandatory The contents of this field are vendor specific. The intent is to provide a text representation of the power supply or generator system software version. Any printable ASCII charac…	column	OctetString	`.1.3.6.1.4.1.5591.1.6.2.1.3`
genDeviceId mandatory The content of this field is vendor specific. The intent is to provide manufacturer and/or product specific ASCII text information that will propagate to the manager's console ve…	column	OctetString	`.1.3.6.1.4.1.5591.1.6.2.1.4`
genGasHazardOption mandatory Defines if gas hazard sensor is installed.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.5`
genWaterIntrusionOption mandatory Defines if water intrusion sensor is installed.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.6`
genPadShearOption mandatory Defines if pad shear sensor is installed.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.7`
genDoorOption mandatory Defines if separate generator door is installed.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.8`
genChargerOption mandatory Defines if charger fail signal is supported.	column	Enumeration	`.1.3.6.1.4.1.5591.1.6.2.1.9`

Indexes