cmcIIIMsgText
RITTAL-CMC-III-MIB ·
.1.3.6.1.4.1.2606.7.4.3.2.1.3
Object
column
OctetString
Text for each message (entry in the table).
Context
- MIB
- RITTAL-CMC-III-MIB
- OID
.1.3.6.1.4.1.2606.7.4.3.2.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmcIIIMsgEntry
- Table
- cmcIIIMsgTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-40
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmcIIIMsgDeviceIndex Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs. | column | Unsigned32 | .1.3.6.1.4.1.2606.7.4.3.2.1.1 |
| cmcIIIMsgQuit Reset of this alarm
1: auto
2: manual, alarm needs confirmation, e. g. with 'C' key. | column | Enumeration | .1.3.6.1.4.1.2606.7.4.3.2.1.10 |
| cmcIIIMsgDelay Delay of alarm condition. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2606.7.4.3.2.1.11 |
| cmcIIIMsgSchedAlarmOff Alarm condition disabled by scheduler. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2606.7.4.3.2.1.12 |
| cmcIIIMsgQuality Quality of variable. | column | Enumeration | .1.3.6.1.4.1.2606.7.4.3.2.1.13 |
| cmcIIIMsgVarIdx Index of variable 'Status' in variable table generating this message. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2606.7.4.3.2.1.14 |
| cmcIIIMsgVarValueIdx Index of variable 'Value' in the variable table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2606.7.4.3.2.1.15 |
| cmcIIIMsgStatusText Message status text. | column | OctetString | .1.3.6.1.4.1.2606.7.4.3.2.1.16 |
| cmcIIIMsgIndex Index for the list of message entries. Its value ranges
between 1 and the value of cmcIIINumberOfMsgs. | column | Unsigned32 | .1.3.6.1.4.1.2606.7.4.3.2.1.2 |
| cmcIIIMsgStatus Actual message status
1: not available
2: configuration has changed (sensor new, changed, lost)
3: error
4: OK
5: alarm, e.g. smoke, vibration...
6: warning of analog value, value… | column | Enumeration | .1.3.6.1.4.1.2606.7.4.3.2.1.4 |
| cmcIIIMsgRelay Setup of Alarm relay for this message/alarm
1: no switching of alarm relay
2: switching of alarm relay. | column | Enumeration | .1.3.6.1.4.1.2606.7.4.3.2.1.5 |
| cmcIIIMsgBeeper Setup of Alarm beeper for this alarm
1: no audible alarm
2: audible alarm. | column | Enumeration | .1.3.6.1.4.1.2606.7.4.3.2.1.6 |
| cmcIIIMsgTrap Each bit is representing an entry of cmcIIITrapReceiverTable.
If the corresponding cmcIIITrapReceiverStatus is enabled
setting this bit enables sending messages to this receiver. | column | Bits | .1.3.6.1.4.1.2606.7.4.3.2.1.7 |
| cmcIIIMsgSMTP Each bit is representing an entry of cmcIIISmtpReceiverTable.
If the corresponding cmcIIISmtpReceiverStatus is enabled
setting this bit enables sending messages to this receiver. | column | Bits | .1.3.6.1.4.1.2606.7.4.3.2.1.8 |
| cmcIIIMsgSMS Each bit is representing an entry of cmcIIISmsReceiverTable.
If the corresponding cmcIIISmsReceiverStatus is enabled
setting this bit enables sending messages to this receiver. | column | Bits | .1.3.6.1.4.1.2606.7.4.3.2.1.9 |