cmcIIIMsgSMTP

RITTAL-CMC-III-MIB · .1.3.6.1.4.1.2606.7.4.3.2.1.8
MIB view Table view

Object

column r/w Bits 
Each bit is representing an entry of cmcIIISmtpReceiverTable.
If the corresponding cmcIIISmtpReceiverStatus is enabled
setting this bit enables sending messages to this receiver.

Context

MIB
RITTAL-CMC-III-MIB
OID
.1.3.6.1.4.1.2606.7.4.3.2.1.8
Type
column
Access
readwrite
Status
current
Parent
cmcIIIMsgEntry
Table
cmcIIIMsgTable
Siblings
15

Syntax

Bits

Values & Constraints

Enumerated Values
0receiver1
1receiver2
2receiver3
3receiver4
4receiver5
5receiver6
6receiver7
7receiver8
8receiver9
9receiver10
10receiver11
11receiver12
12receiver13
13receiver14
14receiver15
15receiver16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmcIIIMsgDeviceIndex
Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs.
columnUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.1
cmcIIIMsgQuit
Reset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' key.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.10
cmcIIIMsgDelay
Delay of alarm condition.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.11
cmcIIIMsgSchedAlarmOff
Alarm condition disabled by scheduler.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.12
cmcIIIMsgQuality
Quality of variable.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.13
cmcIIIMsgVarIdx
Index of variable 'Status' in variable table generating this message.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.14
cmcIIIMsgVarValueIdx
Index of variable 'Value' in the variable table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.15
cmcIIIMsgStatusText
Message status text.
columnOctetString.1.3.6.1.4.1.2606.7.4.3.2.1.16
cmcIIIMsgIndex
Index for the list of message entries. Its value ranges between 1 and the value of cmcIIINumberOfMsgs.
columnUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.2
cmcIIIMsgText
Text for each message (entry in the table).
columnOctetString.1.3.6.1.4.1.2606.7.4.3.2.1.3
cmcIIIMsgStatus
Actual message status 1: not available 2: configuration has changed (sensor new, changed, lost) 3: error 4: OK 5: alarm, e.g. smoke, vibration... 6: warning of analog value, value…
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.4
cmcIIIMsgRelay
Setup of Alarm relay for this message/alarm 1: no switching of alarm relay 2: switching of alarm relay.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.5
cmcIIIMsgBeeper
Setup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarm.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.6
cmcIIIMsgTrap
Each bit is representing an entry of cmcIIITrapReceiverTable. If the corresponding cmcIIITrapReceiverStatus is enabled setting this bit enables sending messages to this receiver.
columnBits.1.3.6.1.4.1.2606.7.4.3.2.1.7
cmcIIIMsgSMS
Each bit is representing an entry of cmcIIISmsReceiverTable. If the corresponding cmcIIISmsReceiverStatus is enabled setting this bit enables sending messages to this receiver.
columnBits.1.3.6.1.4.1.2606.7.4.3.2.1.9