cmcIIIMsgStatus

RITTAL-CMC-III-MIB · .1.3.6.1.4.1.2606.7.4.3.2.1.4
MIB view Table view

Object

column Enumeration 
Actual message status
1: not available
2: configuration has changed (sensor new, changed, lost)
3: error
4: OK
5: alarm, e.g. smoke, vibration...
6: warning of analog value, value reached high warning threshold
7: analog value too low, value reached low threshold (Alarm)
8: analog value too high, value reached high threshold (Alarm)
9: warning of analog value, value reached low warning threshold
10: output is set to OFF
11: output is set to ON
12: door is open
13: door is closed
14: door is locked
15: door is unlocked by remote input, e.g. external card reader
16: door is unlocked by reader or keypad connected
17: door is unlocked by SNMP set command
18: door is unlocked by WEB
19: door is unlocked by timer
20: no access, wrong key code or card number
21: lost
22: detected
23: battery low, wireless sensor
24: sensor cable broken
25: sensor cable short
26: sensor calibration in progress
27: sensor is inactive
28: sensor is active
29: no Power (PSM)
30: read only (SD, USB-Stick)
31: control boards of LCP exchanged
32: valve open (info)
33: warning
34: remote control.

Context

MIB
RITTAL-CMC-III-MIB
OID
.1.3.6.1.4.1.2606.7.4.3.2.1.4
Type
column
Access
readonly
Status
current
Parent
cmcIIIMsgEntry
Table
cmcIIIMsgTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1notAvail
2configChanged
3error
4ok
5alarm
6highWarn
7lowAlarm
8highAlarm
9lowWarn
10setOff
11setOn
12open
13closed
14locked
15unlRemote
16doorOpen
17service
18standby
19busy
20noAccess
21lost
22detected
23lowVoltage
24probeopen
25probeshort
26calibration
27inactive
28active
29noPower
30readOnly
31exchanged
32valveOpen
33warning
34remote

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmcIIIMsgDeviceIndex
Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs.
columnUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.1
cmcIIIMsgQuit
Reset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' key.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.10
cmcIIIMsgDelay
Delay of alarm condition.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.11
cmcIIIMsgSchedAlarmOff
Alarm condition disabled by scheduler.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.12
cmcIIIMsgQuality
Quality of variable.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.13
cmcIIIMsgVarIdx
Index of variable 'Status' in variable table generating this message.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.14
cmcIIIMsgVarValueIdx
Index of variable 'Value' in the variable table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2606.7.4.3.2.1.15
cmcIIIMsgStatusText
Message status text.
columnOctetString.1.3.6.1.4.1.2606.7.4.3.2.1.16
cmcIIIMsgIndex
Index for the list of message entries. Its value ranges between 1 and the value of cmcIIINumberOfMsgs.
columnUnsigned32.1.3.6.1.4.1.2606.7.4.3.2.1.2
cmcIIIMsgText
Text for each message (entry in the table).
columnOctetString.1.3.6.1.4.1.2606.7.4.3.2.1.3
cmcIIIMsgRelay
Setup of Alarm relay for this message/alarm 1: no switching of alarm relay 2: switching of alarm relay.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.5
cmcIIIMsgBeeper
Setup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarm.
columnEnumeration.1.3.6.1.4.1.2606.7.4.3.2.1.6
cmcIIIMsgTrap
Each bit is representing an entry of cmcIIITrapReceiverTable. If the corresponding cmcIIITrapReceiverStatus is enabled setting this bit enables sending messages to this receiver.
columnBits.1.3.6.1.4.1.2606.7.4.3.2.1.7
cmcIIIMsgSMTP
Each bit is representing an entry of cmcIIISmtpReceiverTable. If the corresponding cmcIIISmtpReceiverStatus is enabled setting this bit enables sending messages to this receiver.
columnBits.1.3.6.1.4.1.2606.7.4.3.2.1.8
cmcIIIMsgSMS
Each bit is representing an entry of cmcIIISmsReceiverTable. If the corresponding cmcIIISmsReceiverStatus is enabled setting this bit enables sending messages to this receiver.
columnBits.1.3.6.1.4.1.2606.7.4.3.2.1.9