dsx3SendCode

RFC1407-MIB · .1.3.6.1.2.1.10.30.5.1.7

Object

column r/w Enumeration

This variable indicates what type of code is
being sent across the DS3/E3 interface by the
device.  (These are optional for E3 interfaces.)
Setting this variable causes the interface to
begin sending the code requested.
The values mean:
              
   dsx3SendNoCode
       sending looped or normal data
              
   dsx3SendLineCode
       sending a request for a line loopback
              
   dsx3SendPayloadCode
       sending a request for a payload loopback
       (i.e., all DS1/E1s in a DS3/E3 frame)
              
   dsx3SendResetCode
       sending a loopback deactivation request
              
   dsx3SendDS1LoopCode
       requesting to loopback a particular DS1/E1
       within a DS3/E3 frame.  The DS1/E1 is
       indicated in dsx3Ds1ForRemoteLoop.
              
   dsx3SendTestPattern
       sending a test pattern.

Context

MIB: RFC1407-MIB
OID: .1.3.6.1.2.1.10.30.5.1.7
Type: column
Access: readwrite
Status: current
Parent: dsx3ConfigEntry
Table: dsx3ConfigTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	dsx3SendNoCode
`2`	dsx3SendLineCode
`3`	dsx3SendPayloadCode
`4`	dsx3SendResetCode
`5`	dsx3SendDS1LoopCode
`6`	dsx3SendTestPattern

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dsx3LineIndex This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable. …	column	IF-MIBInterfaceIndex	`.1.3.6.1.2.1.10.30.5.1.1`
dsx3LineStatus This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map represented as a …	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.10`
dsx3TransmitClockSource The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local…	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.11`
dsx3InvalidIntervals The number of intervals in the range from 0 to dsx3ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some interv…	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.12`
dsx3LineLength The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use this object to adjust the line build out.	column	meters Integer32	`.1.3.6.1.2.1.10.30.5.1.13`
dsx3LineStatusLastChange The value of MIB II's sysUpTime object at the time this DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the …	column	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.10.30.5.1.14`
dsx3LineStatusChangeTrapEnable Indicates whether dsx3LineStatusChange traps should be generated for this interface.	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.15`
dsx3LoopbackStatus This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. …	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.16`
dsx3Channelization Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabledDs3…	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.17`
dsx3Ds1ForRemoteLoop Indicates which DS1/E1 on this DS3/E3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all DS1s/E1s will be lo…	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.18`
dsx3IfIndex deprecated This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).	column	IF-MIBInterfaceIndex	`.1.3.6.1.2.1.10.30.5.1.2`
dsx3TimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the sys…	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.3`
dsx3ValidIntervals The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the v…	column	Integer32	`.1.3.6.1.2.1.10.30.5.1.4`
dsx3LineType This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics.…	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.5`
dsx3LineCoding This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3 refer to the use of…	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.6`
dsx3CircuitIdentifier This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.	column	OctetString	`.1.3.6.1.2.1.10.30.5.1.8`
dsx3LoopbackConfig This variable represents the desired loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is no…	column	Enumeration	`.1.3.6.1.2.1.10.30.5.1.9`