rdnSpectrumHopPowerLevel
RDN-CABLE-SPECTRUM-GROUP-MIB ·
.1.3.6.1.4.1.4981.6.1.2.3.1.8
Object
column
r/w
Integer32
Identifies a power level change for this individual spectrum
hop. Different channel width has different power level range,
< -160, 140 > for 200 KHz, < -130, 170 > for 400 KHz, < -100,
200 > for 800 KHz, < -70, 230 > for 1600 KHz, < -40, 260 > for
3200 KHz. For power default, the range is < -150, 150 > for
all the channel widths. The unit is in tenths of a dBmV.
If the rdnSpectrumHopSelection is 'powerDefault(3)' and
a value of 0 is returned for this object for the same
instance then this is a valid Power Level for this Hop action.
Else if the rdnSpectrumHopSelection is not 'powerDefault(3)'
and a value of 0 is returned for this object for the same
instance then this object is not applicable to this hop action.
This object applies only to CMTS 1x4 and 1x8 cards, not to
CMTS 2x8 cards.
Context
- MIB
- RDN-CABLE-SPECTRUM-GROUP-MIB
- OID
.1.3.6.1.4.1.4981.6.1.2.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rdnSpectrumHopEntry
- Table
- rdnSpectrumHopTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: -160-260
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnSpectrumHopId The index for the spectrum hop rule table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.1 |
| rdnSpectrumHopRowStatus The row status that controls the add and deletion of the
spectrum hop rule entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4981.6.1.2.3.1.10 |
| rdnSpectrumHopSelection Identifies the selection of the action for this spectrum hop
rule. If the value is 'frequency(1)' then the only applicable
objects are rdnSpectrumHopPriority and rdnSpectrumHopFr… | column | SpectrumHopSelections | .1.3.6.1.4.1.4981.6.1.2.3.1.2 |
| rdnSpectrumHopPriority Identifies the priority for this spectrum hop policy. The
default value is 128. The range is 1 to 255.
This parameter applies to all CMTS card types. | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.3 |
| rdnSpectrumHopFrequency Identifies the center frequency for the spectrum hop
schedule entry. The hop can be specified with a discrete
center frequency or with a band but not both in the same
group.
… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.4 |
| rdnSpectrumHopBandLow The start frequency for the individual spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this object.
Thi… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.5 |
| rdnSpectrumHopBandHigh The stop frequency for the individual spectrum hop. This value must
be at least 200000 Hz higher than the start frequency.
This object is not applicable to a hop ac… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.6 |
| rdnSpectrumHopChannelWidth Identifies the channel width change for this individual spectrum
hop. The valid band width is 200000 Hz, 400000 Hz, 800000 Hz,
1600000 Hz, 3200000 Hz.
This object … | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.3.1.7 |
| rdnSpectrumHopModulationProfile Identifies the modulation profile change for this individual
spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this obj… | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.9 |