rdnSpectrumHopModulationProfile
RDN-CABLE-SPECTRUM-GROUP-MIB ·
.1.3.6.1.4.1.4981.6.1.2.3.1.9
Object
column
r/w
Integer32
Identifies the modulation profile change for this individual
spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this object.
This parameter applies to all CMTS card types, although the criteria
for making hop decisions is dependent on card type.
For CMTS 2x8 cards, hop decisions are made on the basis of
SNR measurements. For older, 1x8 and 1x4 cards, hop decisions
are made on the basis of error thresholds, or modem flapping.
Context
- MIB
- RDN-CABLE-SPECTRUM-GROUP-MIB
- OID
.1.3.6.1.4.1.4981.6.1.2.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rdnSpectrumHopEntry
- Table
- rdnSpectrumHopTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnSpectrumHopId The index for the spectrum hop rule table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.1 |
| rdnSpectrumHopRowStatus The row status that controls the add and deletion of the
spectrum hop rule entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4981.6.1.2.3.1.10 |
| rdnSpectrumHopSelection Identifies the selection of the action for this spectrum hop
rule. If the value is 'frequency(1)' then the only applicable
objects are rdnSpectrumHopPriority and rdnSpectrumHopFr… | column | SpectrumHopSelections | .1.3.6.1.4.1.4981.6.1.2.3.1.2 |
| rdnSpectrumHopPriority Identifies the priority for this spectrum hop policy. The
default value is 128. The range is 1 to 255.
This parameter applies to all CMTS card types. | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.3 |
| rdnSpectrumHopFrequency Identifies the center frequency for the spectrum hop
schedule entry. The hop can be specified with a discrete
center frequency or with a band but not both in the same
group.
… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.4 |
| rdnSpectrumHopBandLow The start frequency for the individual spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this object.
Thi… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.5 |
| rdnSpectrumHopBandHigh The stop frequency for the individual spectrum hop. This value must
be at least 200000 Hz higher than the start frequency.
This object is not applicable to a hop ac… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.6 |
| rdnSpectrumHopChannelWidth Identifies the channel width change for this individual spectrum
hop. The valid band width is 200000 Hz, 400000 Hz, 800000 Hz,
1600000 Hz, 3200000 Hz.
This object … | column | Enumeration | .1.3.6.1.4.1.4981.6.1.2.3.1.7 |
| rdnSpectrumHopPowerLevel Identifies a power level change for this individual spectrum
hop. Different channel width has different power level range,
< -160, 140 > for 200 KHz, < -130, 170 > for 400 KHz, <… | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.8 |