rdnSpectrumHopChannelWidth
RDN-CABLE-SPECTRUM-GROUP-MIB ·
.1.3.6.1.4.1.4981.6.1.2.3.1.7
Object
column
r/w
Enumeration
Identifies the channel width change for this individual spectrum
hop. The valid band width is 200000 Hz, 400000 Hz, 800000 Hz,
1600000 Hz, 3200000 Hz.
This object is not applicable to a hop action when a
value of 0 is reported by this object.
This object applies only to CMTS 1x4 and 1x8 cards, not to
CMTS 2x8 cards.
Context
- MIB
- RDN-CABLE-SPECTRUM-GROUP-MIB
- OID
.1.3.6.1.4.1.4981.6.1.2.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rdnSpectrumHopEntry
- Table
- rdnSpectrumHopTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notApplicable |
200000 | channelWidth1 |
400000 | channelWidth2 |
800000 | channelWidth3 |
1600000 | channelWidth4 |
3200000 | channelWidth5 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnSpectrumHopId The index for the spectrum hop rule table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.1 |
| rdnSpectrumHopRowStatus The row status that controls the add and deletion of the
spectrum hop rule entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4981.6.1.2.3.1.10 |
| rdnSpectrumHopSelection Identifies the selection of the action for this spectrum hop
rule. If the value is 'frequency(1)' then the only applicable
objects are rdnSpectrumHopPriority and rdnSpectrumHopFr… | column | SpectrumHopSelections | .1.3.6.1.4.1.4981.6.1.2.3.1.2 |
| rdnSpectrumHopPriority Identifies the priority for this spectrum hop policy. The
default value is 128. The range is 1 to 255.
This parameter applies to all CMTS card types. | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.3 |
| rdnSpectrumHopFrequency Identifies the center frequency for the spectrum hop
schedule entry. The hop can be specified with a discrete
center frequency or with a band but not both in the same
group.
… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.4 |
| rdnSpectrumHopBandLow The start frequency for the individual spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this object.
Thi… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.5 |
| rdnSpectrumHopBandHigh The stop frequency for the individual spectrum hop. This value must
be at least 200000 Hz higher than the start frequency.
This object is not applicable to a hop ac… | column | Unsigned32 | .1.3.6.1.4.1.4981.6.1.2.3.1.6 |
| rdnSpectrumHopPowerLevel Identifies a power level change for this individual spectrum
hop. Different channel width has different power level range,
< -160, 140 > for 200 KHz, < -130, 170 > for 400 KHz, <… | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.8 |
| rdnSpectrumHopModulationProfile Identifies the modulation profile change for this individual
spectrum hop.
This object is not applicable to a hop action when a
value of 0 is reported by this obj… | column | Integer32 | .1.3.6.1.4.1.4981.6.1.2.3.1.9 |