rcSlppPortPktRxCount
RC-SLPP-MIB ·
.1.3.6.1.4.1.2272.1.64.1.1.3.1.7
Object
column
Integer32
Total number of SLPP packets received on the port
Context
- MIB
- RC-SLPP-MIB
- OID
.1.3.6.1.4.1.2272.1.64.1.1.3.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcSlppPortEntry
- Table
- rcSlppPortTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcSlppPortIfIndex Port on which simple loop detection occurs on. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.64.1.1.3.1.1 |
| rcSlppPortGuardStatus The object indicates the SLPP-guard status of a port. | column | Enumeration | .1.3.6.1.4.1.2272.1.64.1.1.3.1.10 |
| rcSlppPortGuardTimerCount This value specifies the time period that has passed since
a port was administratively disabled by SLPP-guard. When this
object reaches the timeout value (rcSlppPortGuardTimeout)… | column | Integer32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.11 |
| rcSlppPortTimeToClrPktRxCount Time to clear the SLPP Rx PDU counter. This has a
maximum value of 86400 seconds. The timer starts
when SLPP is enabled and port starts receiving SLPP
SLPP PDUs. When the time e… | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.12 |
| rcSlppPortRemainingTimeToClrPktRxCount Remaining time to clear the SLPP Rx PDU counter. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.13 |
| rcSlppPortClearPktRxCount Clear the SLPP Rx PDU counter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.64.1.1.3.1.14 |
| rcSlppPortGuardOrigin Indicates how slpp guard was configured.
Supported values:
config - set by user
radius - set by radius atribute | column | Bits | .1.3.6.1.4.1.2272.1.64.1.1.3.1.15 |
| rcSlppPortPktRxThreshold Once the number of SLPP packets received on this port reaches this threshold
action will be taken. Normally, the port will be shutdown. | column | Integer32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.2 |
| rcSlppPortSlppEnable Flag to indicate whether the port entry is active or not for SLPP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.64.1.1.3.1.3 |
| rcSlppPortRowStatus Used to create/delete entries. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.64.1.1.3.1.4 |
| rcSlppPortIncomingVlanId Vlan id of the classified packet on the port brought down by
SLPP. | column | Integer32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.5 |
| rcSlppPortSrcNodeType The src node type of the received slpp Pkt. | column | Enumeration | .1.3.6.1.4.1.2272.1.64.1.1.3.1.6 |
| rcSlppPortGuardEnable Flag to indicate if SLPP-guard is enabled on the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.64.1.1.3.1.8 |
| rcSlppPortGuardTimeout This value specifies the time period for which a port will remain
disabled. When SLPP-guard disables a port, after this time period
expires, the port will become re-enabled. A v… | column | Integer32 | .1.3.6.1.4.1.2272.1.64.1.1.3.1.9 |