rcIpv6IsisGenInFilter
RC-IPV6-MIB ·
.1.3.6.1.4.1.2272.1.62.1.1.1.25
Object
node
No description available.
Context
- MIB
- RC-IPV6-MIB
- OID
.1.3.6.1.4.1.2272.1.62.1.1.1.25- Type
- node
- Parent
- rcIpv6Scalars
- Siblings
- 25
- Children
- 6
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6IcmpErrorInterval The rate limit interval (in milliseconds) at which
ICMP error messages can be sent out.
A value of zero means no rate limit. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.1.1 |
| rcIpv6RouteStaticClear Clear all IPv6 static routes. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.10 |
| rcIpv6RouteStaticGlobalAdminEnabled Used to globally enable/disable all IPv6 static routes. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.11 |
| rcIpv6IcmpAnycastEchoReply Used to enable/disable icmp echo reply msg
for anycast addresses. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.12 |
| rcIpv6IcmpMulticastEchoReply Used to enable/disable icmp echo reply msg
for multicast addresses. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.13 |
| rcIpv6Autoconfig Used to enable / disable IPv6 autoconfiguration
from router advertisements | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.14 |
| rcIpv6IcmpAddrUnreach Used to enable / disable address unreachable message | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.15 |
| rcIpv6IcmpPortUnreach Used to enable / disable port unreachable message | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.16 |
| rcIpv6SlowPathToCpu Used to enable / disable slow-path-to-cpu | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.17 |
| rcIpv6ClearGlobalIcmpStats Setting this object will clear global IPv6 ICMP statistics | scalar | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.1.18 |
| rcIpv6EcmpEnable Used to globally enable/disable equal-cost
multi-path feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.19 |
| rcIpv6MulticastAdminStatus This indicates the global admin status for
multicast. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.2 |
| rcIpv6EcmpMaxPath Used to globally set the maximum number of
paths that can be equal cost. | scalar | Unsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.1.20 |
| rcIpv6RoutePrefTableSize table size of the rcIpv6RoutePrefTable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.21 |
| rcIpv6AlternativeRouteEnable Used to globally enable/disable alterative-route | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.22 |
| rcIpv6SourceRouteEnable Used to globally enable/disable ipv6 source routing feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.23 |
| rcIpv6IcmpMulticastRequestEnable Used to globally enable/disable
ipv6 icmp echo multicast request feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.24 |
| rcIpv6IsisInFilterDefault | node | - | .1.3.6.1.4.1.2272.1.62.1.1.1.26 |
| rcIpv6IcmpNetUnreach Used to set the icmp net unreach feature enable/disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.3 |
| rcIpv6IcmpRedirectMsg used to set the icmp redirect feature enable/disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.4 |
| rcIpv6IcmpErrorQuota The number of ICMP error messages that can
be sent out during ICMP error interval.
A value of zero means not be send any. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.1.5 |
| rcIpv6GlobalAdminEnabled Indicates whether IPv6 has been administratively
enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.6 |
| rcIpv6GlobalOperEnabled Indicates whether IPv6 is currently enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.7 |
| rcIpv6PrefixListTableSize Size of Ipv6 Prefix List Table | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.1.8 |
| rcIpv6ClearDhcpCounters Setting this object will clear IPv6 DHCP counters. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6IsisInFilterNickNameTableSize Ipv6 Isis In Filter Nick Name table size | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.25.1 |
| rcIpv6IsisInFilterIsidTableSize Ipv6 Isis In Filter Isid table size | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.25.2 |
| rcIpv6IsisInFilterNickNameIsidTableSize Ipv6 Isis In Filter Nick Name Isid table size | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.25.3 |
| rcIpv6IsisInFilterIsidListTableSize Ipv6 Isis In Filter Isid List table size | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.25.4 |
| rcIpv6IsisInFilterNickNameIsidListTableSize Ipv6 Isis In Filter Nick Name Isid List table size | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.25.5 |
| rcIpv6IsisInFilterApply Used to Apply the Ipv6 Isis Accept filters.
When the value is set to apply, all the elements in
the in the various Ipv6 Isis In Filter Tables will be
applied as well as rcIpv6Isi… | scalar | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.1.25.6 |