rcIpv6IcmpErrorInterval

RC-IPV6-MIB · .1.3.6.1.4.1.2272.1.62.1.1.1.1
MIB view Table view

Object

scalar r/w Integer32 
The rate limit interval (in milliseconds) at which 
ICMP error messages can be sent out.
A value of zero means no rate limit.

Context

MIB
RC-IPV6-MIB
OID
.1.3.6.1.4.1.2272.1.62.1.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
rcIpv6Scalars
Siblings
25

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpv6RouteStaticClear
Clear all IPv6 static routes.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.10
rcIpv6RouteStaticGlobalAdminEnabled
Used to globally enable/disable all IPv6 static routes.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.11
rcIpv6IcmpAnycastEchoReply
Used to enable/disable icmp echo reply msg for anycast addresses.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.12
rcIpv6IcmpMulticastEchoReply
Used to enable/disable icmp echo reply msg for multicast addresses.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.13
rcIpv6Autoconfig
Used to enable / disable IPv6 autoconfiguration from router advertisements
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.14
rcIpv6IcmpAddrUnreach
Used to enable / disable address unreachable message
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.15
rcIpv6IcmpPortUnreach
Used to enable / disable port unreachable message
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.16
rcIpv6SlowPathToCpu
Used to enable / disable slow-path-to-cpu
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.17
rcIpv6ClearGlobalIcmpStats
Setting this object will clear global IPv6 ICMP statistics
scalarEnumeration.1.3.6.1.4.1.2272.1.62.1.1.1.18
rcIpv6EcmpEnable
Used to globally enable/disable equal-cost multi-path feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.19
rcIpv6MulticastAdminStatus
This indicates the global admin status for multicast.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.2
rcIpv6EcmpMaxPath
Used to globally set the maximum number of paths that can be equal cost.
scalarUnsigned32.1.3.6.1.4.1.2272.1.62.1.1.1.20
rcIpv6RoutePrefTableSize
table size of the rcIpv6RoutePrefTable
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.62.1.1.1.21
rcIpv6AlternativeRouteEnable
Used to globally enable/disable alterative-route
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.22
rcIpv6SourceRouteEnable
Used to globally enable/disable ipv6 source routing feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.23
rcIpv6IcmpMulticastRequestEnable
Used to globally enable/disable ipv6 icmp echo multicast request feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.24
rcIpv6IsisGenInFilternode-.1.3.6.1.4.1.2272.1.62.1.1.1.25
rcIpv6IsisInFilterDefaultnode-.1.3.6.1.4.1.2272.1.62.1.1.1.26
rcIpv6IcmpNetUnreach
Used to set the icmp net unreach feature enable/disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.3
rcIpv6IcmpRedirectMsg
used to set the icmp redirect feature enable/disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.4
rcIpv6IcmpErrorQuota
The number of ICMP error messages that can be sent out during ICMP error interval. A value of zero means not be send any.
scalarInteger32.1.3.6.1.4.1.2272.1.62.1.1.1.5
rcIpv6GlobalAdminEnabled
Indicates whether IPv6 has been administratively enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.6
rcIpv6GlobalOperEnabled
Indicates whether IPv6 is currently enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.1.7
rcIpv6PrefixListTableSize
Size of Ipv6 Prefix List Table
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2272.1.62.1.1.1.8
rcIpv6ClearDhcpCounters
Setting this object will clear IPv6 DHCP counters.
scalarEnumeration.1.3.6.1.4.1.2272.1.62.1.1.1.9