rcSysRmonEnable

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.1.23
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
Control whether the RMON feature should be
enabled.
          
 To enable the RMON feature, set this variable to
 true.  The RMON agent in the device will get 
started immediately if the amount of memory
 specified by rcSysRmonMemSize is currently
 available in the device.
          
 To disable the RMON feature, set this variable to
 false, save the new setting to NVRAM, and reboot
 the device.  After the device is rebooted the
 RMON agent will not be operational.

Context

MIB
RAPID-CITY-VSP
OID
.1.3.6.1.4.1.2272.1.1.23
Type
scalar
Access
readwrite
Status
current
Parent
rcSystem
Siblings
82

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcSysIpAddr
This entity's IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.1
rcSysLastChange
Last management initiated configuration change since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.10
rcSysLicenseTrialDaysLeft
This indicates days left before License Trial Period will expire.
scalarUnsigned32.1.3.6.1.4.1.2272.1.1.100
rcSysLastVlanChange
Last management initiated VLAN configuration change since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.11
rcSysTotalPower
The total power for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.116
rcSysRedundantPower
Used to indicate the redundant power on the chassis. The redundant power is per power supply unit
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.117
rcSysAuthSuccessTrapEnable
Used to enable/disable the trap send for authenticaion success trap rcnAuthenticationSuccess. It only allow to be set when snmpEnableAuthenTraps is enabled. I will be set to disab…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.118
rcSysUdpSrcByVirtualIpEnable
Used to enable/disable virtual ip as udp source.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.119
rcSysLastStatisticsReset
Last management initiated statistics reset since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.12
rcSysBufferUtil
Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion.
scalarInteger32.1.3.6.1.4.1.2272.1.1.13
rcSysBufferUtilPeak
The largest buffer utilization since sysUpTime
scalarInteger32.1.3.6.1.4.1.2272.1.1.14
rcSysBufferUtilPeakTime
Timestamp for rcSysPeakBandwidth
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.15
rcSysNVRamSize
Total Non-volatile RAM in Kbytes
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.16
rcSysNVRamUsed
Non-volatile RAM in use in Kbytes
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.17
rcSysLastSaveToNVRam
SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.18
rcSysLastSaveToStandbyNVRam
SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.19
rcSysNetMask
This entity's subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.2
rcSysCpuUtil deprecated
Percentage of CPU utilization. This object is not supported on VSP. VSP uses rcKhiSlotCpuCurrentUtil
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.20
rcSysRmonMemSize
Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE.
scalarInteger32.1.3.6.1.4.1.2272.1.1.22
rcSysRmonTrapOption
Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients in the system trap …
scalarEnumeration.1.3.6.1.4.1.2272.1.1.25
rcSysSupportRouting
Used to indicate whether routing is supported in this product.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.26
rcSysSupportWebServer
Used to indicate whether WebServer is supported in this product.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.27
rcSysLastIpAddrChange
Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by this variable.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.28
rcSysBroadcast
This entity's broadcast address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.3
rcSysAccessPolicyEnable
Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied access to this device.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.31
rcSysDefaultRuntimeConfigFileName
default config.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.1.32
rcSysDefaultBootConfigFileName
default boot config.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.1.33
rcSysConfigFileName
File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used instead of t…
scalarOctetString.1.3.6.1.4.1.2272.1.1.34
rcSysLastRunTimeConfigSave
SysUpTime of the last time when the run time configuration was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.35
rcSysLastRunTimeConfigSaveToSlave
SysUpTime of the last time when the run time configuration was written to slave NVRAM.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.36
rcSysLastBootConfigSave
SysUpTime of the last time when the boot configuration was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.37
rcSysLastBootConfigSaveOnSlave
SysUpTime of the last time when the boot configuration was written on the slave NVRAM.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.38
rcSysRmonUtilizationMethod
Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed t…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.39
rcSysOtherBufferUtil
bw currently consumed
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.41
rcSysOtherBufferUtilPeak
peak bw since reset
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.42
rcSysOtherBufferUtilPeakTime
timestamp for rcSysPeakBw
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.43
rcSysOtherCpuUtil
% cpu utilization
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.44
rcSysDramSize
Dram size in mega-bytes
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.46
rcSysDramUsed
Dram used in percentage
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.47
rcSysDramFree
Dram free size in kilo-bytes
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.48
rcSysDramMaxBlockFree
Dram max block free size in kilo-bytes
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.49
rcSysVirtualIpAddr
Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP address, this address…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.51
rcSysVirtualNetMask
Net mask of the management virtual Ip address
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.52
rcSysReadWriteLevel
The status of the read/write level
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.53
rcSysMTUSize
This is the maximum transmission size of frames that all the ports on the chassis support.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.55
rcSysForceTrapSender
This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.57
rcSysMrouteStrLimit
enable or disable mroute stream limit in system.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.58
rcSysAccessPolicyTable
Management access policy table. This table is used to permit or deny access to this device via the specified source Id.
table-.1.3.6.1.4.1.2272.1.1.61
rcSysTrapSenderTable
The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address that should receive trap messages from this entity …
table-.1.3.6.1.4.1.2272.1.1.62
rcSysDnsServerListTable
DNS serever list table used to store the details of the DNS server configured.
table-.1.3.6.1.4.1.2272.1.1.64
rcSysDnsHostTable
DNS Host table.
table-.1.3.6.1.4.1.2272.1.1.65
rcSysMsgLogFrequency
Used to specify the maximum frequency/count of the occurence of the Log Message.
scalarInteger32.1.3.6.1.4.1.2272.1.1.66
rcSysMsgLogText
A textual string containing the first four characters of the Log Message.
scalarOctetString.1.3.6.1.4.1.2272.1.1.67
rcSysForceIpHdrSender
Flag to decide if IP header source address will be matched with SNMP header sender networks.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.68
rcSysVersion
Software version running on device
scalarOctetString.1.3.6.1.4.1.2272.1.1.7
rcSysDnsDomainName
Default domain used for querying the DNS Server.
scalarOctetString.1.3.6.1.4.1.2272.1.1.70
rcSysDnsServerListIpAddr
DNS server's IP address
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.71
rcSysDnsRequestType
DNS Type: Whether it was Dns Request or a Response
scalarEnumeration.1.3.6.1.4.1.2272.1.1.72
rcSysSpanningTreeOperMode
This object indicates the current spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which supports multip…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.73
rcSysSpanningTreeAdminMode
This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which supports multip…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.74
rcSysAutoRecoverDelay
Time interval in seconds after which auto-recovery runs on ports to clear action taken by cp-limit, link flap or loop detect
scalarInteger32.1.3.6.1.4.1.2272.1.1.75
rcSysMacFlapLimitTime
Time limit in milliseconds for MAC flapping for loop-detect feature
scalarInteger32.1.3.6.1.4.1.2272.1.1.76
rcSysMacFlapLimitCount
Number of times mac flapping can happen for loop-detect feature
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.77
rcSysExtCplimitEnable
enable or disable extended CP-LIMIT in system.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.78
rcSysExtCplimitMinCongTime
Minimum time for which System octapid should be congested to trigger congestion algorithm for extended CP-LIMIT in mSecs
scalarInteger32.1.3.6.1.4.1.2272.1.1.79
rcSysExtCplimitMaxPorts
Maximum number of ports which need to be monitored for congestion in Extended CP-LIMIT
scalarInteger32.1.3.6.1.4.1.2272.1.1.80
rcSysExtCplimitPortCongTime
Minimum time for which ingress traffic utilization rate of a monitored port should stay more than the allowed limits in order to disable the port for extended CP-LIMIT in Secs
scalarInteger32.1.3.6.1.4.1.2272.1.1.81
rcSysExtCplimitTrapLevel
Indicates the trap level for extended CP-LIMIT
scalarEnumeration.1.3.6.1.4.1.2272.1.1.82
rcSysExtCplimitSysOctapidCongested
Indicates whether system octapid congestion detected for extended cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.83
rcSysExtCplimitPortsMonitored
Indicates whether ports has been shutdown due to extended cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.84
rcSysExtCplimitPortsShutDown
Indicates whether ports has been shutdown due to extended Cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.85
rcSysActionL1
Initiate a system action for layer1 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.86
rcSysActionL2
Initiate a system action for layer2 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.87
rcSysActionL3
Initiate a system action for layer3 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.88
rcSysActionRwa
Initiate a system action.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.89
rcSysResult
Result from the last system action.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.9
rcSysPowerUsage
The current power usage for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.90
rcSysPowerAvailable
The current power available for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.91
rcSysFrcMsgControlTable
Management Force-msg Control table. This table is used to specify the pattern for Force-msg Control
table-.1.3.6.1.4.1.2272.1.1.94
rcSysAccPolSnmpGrpTable
SNMP group list for access policy
table-.1.3.6.1.4.1.2272.1.1.95
rcSysVirtualIpv6Addr
Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address.
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.1.96
rcSysVirtualIpv6PrefixLength
The length of the virtual ipv6 addr prefix (in bits).
scalarInteger32.1.3.6.1.4.1.2272.1.1.97