bgpPeerHoldTime

RAD-RadBgp-MIB · .1.3.6.1.4.1.164.11.4.2.1.12

Object

column seconds SNMPv2-SMIInteger32

Time interval in seconds for the Hold Timer
established with the peer.  The value of this
is calculated by this BGP speaker by using the
smaller of the value in bgpPeerHoldTimeConfigd
and the Hold Time received in the OPEN message.
This value must be at least three seconds if it is
not zero (0) in which case the Hold Timer has not
been established with the peer, or, the value of
bgpPeerHoldTimeConfigd is zero (0).

Context

MIB: RAD-RadBgp-MIB
OID: .1.3.6.1.4.1.164.11.4.2.1.12
Type: column
Access: readonly
Status: current
Units: seconds
Parent: bgpPeerEntry
Table: bgpPeerTable
Siblings: 22

Syntax

seconds SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
bgpPeerRemoteAddrType The address family of the remote end of the peering session.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.164.11.4.2.1.1`
bgpPeerHoldTimeConfig Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is c…	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.11.4.2.1.10`
bgpPeerKeepAliveConfig Time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative …	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.164.11.4.2.1.11`
bgpPeerKeepAlive Time interval in seconds for the KeepAlive timer established with the peer. The value of this is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it …	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.11.4.2.1.13`
bgpPeerConfigMaxPrefix This object is used to limit the number of prefixes that can be accepted from this peer. Setting bgpPeerConfigMaxPrfx to a non-zero value sets the maximum number of…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.11.4.2.1.14`
bgpPeerPassword The password used by this peer.	column	OctetString	`.1.3.6.1.4.1.164.11.4.2.1.15`
bgpPeerCapabilitySent The capabilities announced to the peer on the most recent Open message sent to the peer. This field is set to zero before the first Open message is sent to the peer, and is uncha…	column	BgpCapabilities	`.1.3.6.1.4.1.164.11.4.2.1.16`
bgpPeerCapabilityRcv The capabilities received on the most recent Open message received from the peer. This field is set to zero before the first Open message is received from the peer, and is unchan…	column	BgpCapabilities	`.1.3.6.1.4.1.164.11.4.2.1.17`
bgpPeerCapabilityNegotiated The capabilities negotiated for the session with the peer. This field is set to zero before Open messages have been exchanged with the peer, and is unchanged if the session comes …	column	BgpCapabilities	`.1.3.6.1.4.1.164.11.4.2.1.18`
bgpPeerSelectedLocalAddr The address selected for the local end of the peering session. If a connection exists and bgpPeerLocalAddr is specified then these two fields will be identical.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.164.11.4.2.1.19`
bgpPeerRemoteAddr The address of the remote end of the peering session.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.164.11.4.2.1.2`
bgpPeerSelectedLocalPort The local port selected for transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.164.11.4.2.1.20`
bgpPeerSelectedRemotePort The remote port selected for the transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.164.11.4.2.1.21`
bgpPeerClearCmd Reset action to be performed on BGP session.	column	Enumeration	`.1.3.6.1.4.1.164.11.4.2.1.22`
bgpPeerDescr This object is used as a varbind in the BGP Traps the value of this object should be the IP address contained in the remote peer 'bgpPeerRemoteAddr'	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.164.11.4.2.1.23`
bgpPeerFsmState The BGP peer's FSM state.	column	BgpPeerStates	`.1.3.6.1.4.1.164.11.4.2.1.3`
bgpPeerRowStatus This object type reflects the status of the row within the agent. An instance of this row is returned by the agent to reflect the validity of the current state of this row.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.164.11.4.2.1.4`
bgpPeerLocalAddrType The address family of the local end of the peering session.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.164.11.4.2.1.5`
bgpPeerLocalAddr The address of the local end of the peering session. If a zero length address is used, DC-BGP will not bind a specific address but use whatever is available. In this case the bgp…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.164.11.4.2.1.6`
bgpPeerRemoteAs The remote autonomous system number. This field can only be changed when the BGP peer entry is not active.	column	BgpAutonomousSystemNumber	`.1.3.6.1.4.1.164.11.4.2.1.7`
bgpPeerLastError The last error code and subcode sent or received on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contain…	column	OctetString	`.1.3.6.1.4.1.164.11.4.2.1.8`
bgpPeerFsmEstablishedTime This timer indicates how long this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is conf…	column	seconds SNMPv2-SMIGauge32	`.1.3.6.1.4.1.164.11.4.2.1.9`