bgpPeerCapabilityRcv

RAD-RadBgp-MIB · .1.3.6.1.4.1.164.11.4.2.1.17
MIB view Table view

Object

column BgpCapabilities 
The capabilities received on the most recent Open message
received from the peer.  This field is set to zero before
the first Open message is received from the peer, and is
unchanged if the session comes down.
              
In the event that the peer signals a capability that DC-BGP
does not recognize, this field will only contain those
capabilities that DC-BGP recognizes.  A user should walk the
bgpPeerCapsRcvdTable to confirm the full list of
capabilities received from the peer.

Context

MIB
RAD-RadBgp-MIB
OID
.1.3.6.1.4.1.164.11.4.2.1.17
Type
column
Access
readonly
Status
current
Parent
bgpPeerEntry
Table
bgpPeerTable
Siblings
22

Syntax

BgpCapabilities
Source
BgpCapabilities
Base type
Bits

Values & Constraints

Type Values
0reserved0
1mpIpv4Unicast
2mpIpv4Multicast
3mpIpv4Vpn
4reserved4
5mpIpv6Unicast
6mpIpv6Multicast
7mpIpv6Vpn
8reserved8
9routeRefresh
10gracefulRestart
11routeRefreshCisco
12outboundRouteFilter
13outboundRouteFilterCisco
14fourOctetAs

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bgpPeerRemoteAddrType
The address family of the remote end of the peering session.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.11.4.2.1.1
bgpPeerHoldTimeConfig
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is c…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.11.4.2.1.10
bgpPeerKeepAliveConfig
Time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative …
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.11.4.2.1.11
bgpPeerHoldTime
Time interval in seconds for the Hold Timer established with the peer. The value of this is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeCon…
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.164.11.4.2.1.12
bgpPeerKeepAlive
Time interval in seconds for the KeepAlive timer established with the peer. The value of this is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it …
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.164.11.4.2.1.13
bgpPeerConfigMaxPrefix
This object is used to limit the number of prefixes that can be accepted from this peer. Setting bgpPeerConfigMaxPrfx to a non-zero value sets the maximum number of…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.11.4.2.1.14
bgpPeerPassword
The password used by this peer.
columnOctetString.1.3.6.1.4.1.164.11.4.2.1.15
bgpPeerCapabilitySent
The capabilities announced to the peer on the most recent Open message sent to the peer. This field is set to zero before the first Open message is sent to the peer, and is uncha…
columnBgpCapabilities.1.3.6.1.4.1.164.11.4.2.1.16
bgpPeerCapabilityNegotiated
The capabilities negotiated for the session with the peer. This field is set to zero before Open messages have been exchanged with the peer, and is unchanged if the session comes …
columnBgpCapabilities.1.3.6.1.4.1.164.11.4.2.1.18
bgpPeerSelectedLocalAddr
The address selected for the local end of the peering session. If a connection exists and bgpPeerLocalAddr is specified then these two fields will be identical.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.11.4.2.1.19
bgpPeerRemoteAddr
The address of the remote end of the peering session.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.11.4.2.1.2
bgpPeerSelectedLocalPort
The local port selected for transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.164.11.4.2.1.20
bgpPeerSelectedRemotePort
The remote port selected for the transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.164.11.4.2.1.21
bgpPeerClearCmd
Reset action to be performed on BGP session.
columnEnumeration.1.3.6.1.4.1.164.11.4.2.1.22
bgpPeerDescr
This object is used as a varbind in the BGP Traps the value of this object should be the IP address contained in the remote peer 'bgpPeerRemoteAddr'
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.164.11.4.2.1.23
bgpPeerFsmState
The BGP peer's FSM state.
columnBgpPeerStates.1.3.6.1.4.1.164.11.4.2.1.3
bgpPeerRowStatus
This object type reflects the status of the row within the agent. An instance of this row is returned by the agent to reflect the validity of the current state of this row.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.164.11.4.2.1.4
bgpPeerLocalAddrType
The address family of the local end of the peering session.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.11.4.2.1.5
bgpPeerLocalAddr
The address of the local end of the peering session. If a zero length address is used, DC-BGP will not bind a specific address but use whatever is available. In this case the bgp…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.11.4.2.1.6
bgpPeerRemoteAs
The remote autonomous system number. This field can only be changed when the BGP peer entry is not active.
columnBgpAutonomousSystemNumber.1.3.6.1.4.1.164.11.4.2.1.7
bgpPeerLastError
The last error code and subcode sent or received on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contain…
columnOctetString.1.3.6.1.4.1.164.11.4.2.1.8
bgpPeerFsmEstablishedTime
This timer indicates how long this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is conf…
columnseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.164.11.4.2.1.9