stkHubTRRingTotalOctets
RAD-MIB ·
.1.3.6.1.4.1.164.7.2.1.12
Object
scalar
SNMPv2-SMICounter32
The total octets of the Ring.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.7.2.1.12- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- stkHubTRRing
- Siblings
- 12
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Enumerated Values
1 | noOp |
2 | reset |
3 | resetStat |
4 | rearrangeNovram |
5 | setDefaultConfig |
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stkHubTRRingCorrelationEnable When set to ON(3), the in-band agent should perform
correlation each time a station enters/leaves the segment. | scalar | Enumeration | .1.3.6.1.4.1.164.7.2.1.1 |
| stkHubTRRingTotalFrames The total frames of the Ring. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.7.2.1.10 |
| stkHubTRRingTotalFramesRate The rate of total frames on the Ring. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.7.2.1.11 |
| stkHubTRRingOctetsRatio Current traffic for the last time interval. The traffic is
expressed in percents of the maximum TokenRing traffic . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.7.2.1.13 |
| stkHubTRRingAutorecEnable When set to ON(3), the in-band agent should perform
autorecovery each time a beacon status is detected. | scalar | Enumeration | .1.3.6.1.4.1.164.7.2.1.2 |
| stkHubTRRingAutorecResult When autorecovery is completed the result will be recorded.
While in process, STARTED will be recorded.Before process, NOT STARTED
will be recorded | scalar | Enumeration | .1.3.6.1.4.1.164.7.2.1.3 |
| stkHubTRRingResetStatistics Setting the value of this attribute to ON(3) resets all the inband
statistics and error counters. | scalar | Enumeration | .1.3.6.1.4.1.164.7.2.1.4 |
| stkHubTRRingLineErrCnt This counter is incremented when a frame or token is copied or
repeated by any of the stations on the ring, the E bit is zero in the frame
or token and one of the following condit… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.7.2.1.5 |
| stkHubTRRingBurstErrCnt This counter is incremented when any of the stations on the ring detects the
absence of transitions for five half-bit timers (burst-five error). | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.7.2.1.6 |
| stkHubTRRingACFCErrCnt This counter is incremented when any of the stations on the ring receives an
AMP or SMP frame in which A is equal to C is equal to 0, and then receives
another SMP frame with A i… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.7.2.1.7 |
| stkHubTRRingTotErrCnt The total of the above described errors | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.7.2.1.8 |
| stkHubTRRingTotErrThreshold The Total Errors Threshold value. A trap indicating Soft Error
will be sent, if the total number of errors during the last 10 seconds,
reached the threshold value. Threshold valu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.7.2.1.9 |