stkHubTRRingACFCErrCnt

RAD-MIB · .1.3.6.1.4.1.164.7.2.1.7
MIB view Table view

Object

scalar SNMPv2-SMICounter32 
This counter is incremented when any of the stations on the ring receives an 
AMP or SMP frame in which A is equal to C is equal to 0, and then receives
another SMP frame with A is equal to C is equal to 0 without first receiving an AMP
frame. It denotes a station that cannot set the AC bits properly.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.7.2.1.7
Type
scalar
Access
readonly
Status
current
Parent
stkHubTRRing
Siblings
12

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
stkHubTRRingCorrelationEnable
When set to ON(3), the in-band agent should perform correlation each time a station enters/leaves the segment.
scalarEnumeration.1.3.6.1.4.1.164.7.2.1.1
stkHubTRRingTotalFrames
The total frames of the Ring.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.164.7.2.1.10
stkHubTRRingTotalFramesRate
The rate of total frames on the Ring.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.7.2.1.11
stkHubTRRingTotalOctets
The total octets of the Ring.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.164.7.2.1.12
stkHubTRRingOctetsRatio
Current traffic for the last time interval. The traffic is expressed in percents of the maximum TokenRing traffic .
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.7.2.1.13
stkHubTRRingAutorecEnable
When set to ON(3), the in-band agent should perform autorecovery each time a beacon status is detected.
scalarEnumeration.1.3.6.1.4.1.164.7.2.1.2
stkHubTRRingAutorecResult
When autorecovery is completed the result will be recorded. While in process, STARTED will be recorded.Before process, NOT STARTED will be recorded
scalarEnumeration.1.3.6.1.4.1.164.7.2.1.3
stkHubTRRingResetStatistics
Setting the value of this attribute to ON(3) resets all the inband statistics and error counters.
scalarEnumeration.1.3.6.1.4.1.164.7.2.1.4
stkHubTRRingLineErrCnt
This counter is incremented when a frame or token is copied or repeated by any of the stations on the ring, the E bit is zero in the frame or token and one of the following condit…
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.164.7.2.1.5
stkHubTRRingBurstErrCnt
This counter is incremented when any of the stations on the ring detects the absence of transitions for five half-bit timers (burst-five error).
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.164.7.2.1.6
stkHubTRRingTotErrCnt
The total of the above described errors
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.164.7.2.1.8
stkHubTRRingTotErrThreshold
The Total Errors Threshold value. A trap indicating Soft Error will be sent, if the total number of errors during the last 10 seconds, reached the threshold value. Threshold valu…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.7.2.1.9