agnPtpClkDomain

RAD-Clock-MIB · .1.3.6.1.4.1.164.6.2.52.4.1.1.21
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
For PTP Slave - The domain number in the send header message,
use to verify that the domain number in the receive message is the same,
otherwise the package will be discard.
For PTP Master - The domain that Master clock is set according to the CSM.

Context

MIB
RAD-Clock-MIB
OID
.1.3.6.1.4.1.164.6.2.52.4.1.1.21
Type
column
Access
readwrite
Status
current
Parent
agnPtpClkEntry
Table
agnPtpClkTable
Siblings
33

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agnPtpClkType
This object uniquely represents the PTP Clock Type(PTP1588 or, G.8275.1, or G.8275.2, Master or Slave, same as agnClkSrcPortSrcIdx (from agnClkSrcPortTable).
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.1
agnPtpClkPbit
This object indicates the Priority bit value (range is 0..7) of the PTP frame.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.10
agnPtpClkNumOfIntervals
The number of previous 15-minutes intervals for which data was collected.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.11
agnPtpClkCurr15TimeElapsed
This object indicates the number of seconds that have elapsed since the beginning of the current error-measurement period (range is 0..899).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.12
agnPtpClkCurr15TxSyncPackets
The counter associated with the number of Transmitted Sync Packets, encountered by this PTP clock in the current 15 minute interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.164.6.2.52.4.1.1.13
agnPtpClkCurr15RxSyncPackets
The counter associated with the number of Received Sync Packets, encountered by this PTP clock in the current 15 minute interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.164.6.2.52.4.1.1.14
agnPtpClkCurr15RxFollowupPackets
The counter associated with the number of Received Followup Packets, encountered by this PTP clock in the current 15 minute interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.164.6.2.52.4.1.1.15
agnPtpClkState
This object indicates the PTP clock state. Failuer - The clock state is - Failuer OK - The clock state is - OK Lld - Lower Layer Down
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.16
agnPtpClkIndicatedQl
This object indicates the PTP clock QL that transmit to the CSM.
columnClockQlList.1.3.6.1.4.1.164.6.2.52.4.1.1.17
agnPtpClkClockIdentity deprecated
The identity of the clock.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.18
agnPtpClkRecoveryMode
This object defines the revertive mode.
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.19
agnPtpClkId
This object uniquely represents the PTP Clock ID, same as agnClkSrcPortIdx (from agnClkSrcPortTable).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.2
agnPtpClkWtr
Wait to Restore (WTR) time in sec.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.20
agnPtpClkIpAddress
The IP Address of the Slave, used in NE with more then one Slaves.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.6.2.52.4.1.1.22
agnPtpClkActiveMaster
This object indicates the current active master per slave(recovered).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.23
agnPtpClkRecoveryModeSelect
This object enables to combine between the 1588 and the syncE clock recovery. The actual frequency used from clock selector output to 1588 does not need to be configured. Default:…
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.24
agnPtpClkPortMaxSlaves
This object sets the maximum number of registered slaves per Master.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.25
agnPtpClkPortTxClockDomain
This object set the community domain.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.26
agnPtpClkMasterStatus
This object indicates the Master Status.
columnBits.1.3.6.1.4.1.164.6.2.52.4.1.1.27
agnPtpClkIpAddressType
This object indicates the Type of the Address for agnPtpClkIpAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.6.2.52.4.1.1.28
agnPtpClkNetMetricsClearCounters
Setting this object to masterToSlave(2) or slaveToMaster(3), will enforce a clear operation for agnPtpClkNetMetricsCurrentTable (Master to Slave or Slave to Master) Counters. Upon…
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.29
agnPtpClkSrcPrtClkId
This object indicates the Source Port Clock ID, within the Source Port Identity.
columnOctetString.1.3.6.1.4.1.164.6.2.52.4.1.1.3
agnPtpClkIdentity
The identity of the clock.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.164.6.2.52.4.1.1.30
agnPtpClkAsymmetryCorrection deprecated
The object use to compensate between TX and RX packet delay.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.6.2.52.4.1.1.31
agnPtpClkJointFrequencyTime
The object set the 1PPS algorithm to: enable - recovered frequency and time disable - recovered time only.
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.32
agnPtpClkProfileType
The object set the profile type.
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.33
agnPtpClkPrtPriority2
This object is relevant when agnPtpClkType=g82751Master(6). It is used in the execution of the best master clock algorithm. Lower values take precedence. It provides finer graine…
columnUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.34
agnPtpClkSrcPrtNumber
This object indicates the Source Port Number, within the Source Port Identity.
columnOctetString.1.3.6.1.4.1.164.6.2.52.4.1.1.4
agnPtpClkSyncRate
This object indicates the Sync Rate of the packet, which is transmitted from the master clock towards the slave clock.
columnEnumeration.1.3.6.1.4.1.164.6.2.52.4.1.1.5
agnPtpClkQualityLogVar
This object indicates the stability of the master clock.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.6
agnPtpClkAddrType
This object indicates the Type of the Address, used by this PTP clock.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.164.6.2.52.4.1.1.7
agnPtpClkMcastAddr
This object indicates the Multicast Address, according to agnPtpClkAddrType.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.164.6.2.52.4.1.1.8
agnPtpClkTos
This object indicates the TOS value (range is 0..255) or the DSCP value (range is 0..64) of the PTP frame. 255 = not applicable
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.6.2.52.4.1.1.9