upsAdvTestBatteryProcessStatus

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.1.7.2.14
MIB view Table view

Object

scalar mandatory Enumeration 
The results of the latest battery diagnostic test (battery monitoring test).
ok(1) indicates a successful completion of the test.
preconditionNotMeet(2) indicates that the test did not start, due to low capacity or low load.
batteryTestInProgress(3) indicates that a test is in progress.
refused(4) indicates that the test was refused and did not take place.
aborted(5) indicates that the test started but it was either cancelled or the system encountered an error.
pending(6) the test will commence shortly.
noBatteryPresent(8) indicates that no battery is present (no battery, battery breaker open, etc.) to perform the battery diagnostic test.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.1.7.2.14
Type
scalar
Access
readonly
Status
mandatory
Parent
upsAdvTest
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ok
2preconditionNotMeet
3batteryTestInProgress
4refused
5aborted
6pending
7unknown
8noBatteryPresent

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
upsAdvTestDiagnosticSchedule mandatory
The UPS system's automatic battery test schedule.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.1
upsAdvTestBatteryInterval mandatory
The UPS system's automatic battery test period.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.10
upsAdvTestCalibrationLastSuccessfulDate mandatory
The latest date when the UPS performed a successful runtime calibration test. The format is YYYY-MM-DD
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.11
upsAdvTestBatteryLastSuccessfulDate mandatory
The latest date when the UPS performed a successful battery diagnostic test (battery monitoring test). The format is YYYY-MM-DD
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.12
upsAdvTestBatteryLastDate optional
The latest date when the UPS performed a battery diagnostic test (battery monitoring test), regardless of the test result.The format is YYYY-MM-DD. If not defined, return 2000-01-…
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.13
upsAdvTestBatteryConditionStatus mandatory
Result of the latest successful test 1 = unknown 2 = battery OK 3 = battery capacity decreased 4 = battery defect 5 = indicate that no battery is present (no battery, battery brea…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.15
upsAdvTestDiagnosticsBatteryInterval mandatory
The battery test is a diagnostic test (also referred to as battery monitoring test). The test will be performed on the day stated in upsAdvTestDiagnosticDay and at the time stated…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.16
upsAdvTestDiagnostics mandatory
Setting this variable to testDiagnostics(2) causes the UPS to perform a diagnostic self test. Setting this value to noTestDiagnostics(1) has no effect. The v…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.2
upsAdvTestDiagnosticsResults mandatory
The results of the last UPS diagnostics test performed.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.3
upsAdvTestLastDiagnosticsDate mandatory
The date the last UPS diagnostics test was performed in mm/dd/yy format.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.4
upsAdvTestRuntimeCalibration mandatory
Setting this variable to performCalibration(2) causes the UPS to discharge to calibrate the UPS. The test will only start if the battery capacity is 100%. The test runs until capa…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.5
upsAdvTestCalibrationResults mandatory
The results of the last runtime calibration. Value ok(1) means a successful runtime calibration. Value invalidCalibration(2) indicates last calibration did n…
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.6
upsAdvTestCalibrationDate mandatory
The date the last UPS runtime calibration was performed in mm/dd/yy format.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.7
upsAdvTestDiagnosticTime mandatory
The time of the day to perform automatic battery test. Expressed in 24 hour notation - hh:mm.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.1.7.2.8
upsAdvTestDiagnosticDay mandatory
The day of the week to perform automatic battery test.
scalarEnumeration.1.3.6.1.4.1.318.1.1.1.7.2.9