dm3ConfigRectStandbyAlarm
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.7.2.4.1.2.9
Object
scalar
mandatory
r/w
Enumeration
For the Rectifier Standby Alarm (indicating output DC has been turned off); Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an alarm condition. Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an alarm condition. Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an alarm condition. Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an alarm condition. Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an alarm condition. Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an alarm condition. Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an alarm condition. Setting this OID to alarmMajor (9) causes the Major relay to be activated for an alarm condition. Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.7.2.4.1.2.9- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- dm3ConfigRectAlarms
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | alarmIgnore |
2 | alarmRelay1 |
3 | alarmRelay2 |
4 | alarmRelay3 |
5 | alarmRelay4 |
6 | alarmRelay5 |
7 | alarmRelay6 |
8 | alarmMinor |
9 | alarmMajor |
10 | alarmNofN |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dm3ConfigRectHighVoltAlarm mandatory For the Rectifier High Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be ac… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.1 |
| dm3ConfigRectFanFailAlarm mandatory For the Rectifier Fan Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activa… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.10 |
| dm3ConfigRectFailAlarm mandatory For the Rectifier Fail Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.11 |
| dm3ConfigRectHwVoltAlarm mandatory For the Rectifier Hardware Voltage Alarm (indicating voltage outside realistic limits,
or a possible measurement fault);
Setting this OID to alarmIgnore (1) results in the alarm c… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.12 |
| dm3ConfigRectLowVoltAlarm mandatory For the Rectifier Low Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be act… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.2 |
| dm3ConfigRectConfigAlarm mandatory This alarm is activated when a new rectifier is detected;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) cau… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.3 |
| dm3ConfigRect1ofNAlarm mandatory This setting indicates the action if ONE rectifier of a N+1 system has failed;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID t… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.4 |
| dm3ConfigRect2ofNAlarm mandatory This setting indicates the action if TWO OR MORE rectifiers of a N+1 system have failed;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.5 |
| dm3ConfigRectDiagAlarm mandatory For the Rectifier Controller Diagnostics Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.6 |
| dm3ConfigRectImbalanceAlarm mandatory For the Rectifier Imbalance Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activ… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.7 |
| dm3ConfigRectCurrLimitAlarm mandatory For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.4.1.2.8 |