dm3ConfigCompMethod
PowerNet-MIB ·
.1.3.6.1.4.1.318.1.1.7.2.3.14
Object
scalar
mandatory
r/w
Enumeration
This OID is used to configure and get the state of the battery
temperature compensation.
Setting this OID to tempcompOn (1) will enable/turn on the battery temperature compensation.
Setting this OID to tempcompOff (2) will disable/turn off the battery temperature compensation.
Context
- MIB
- PowerNet-MIB
- OID
.1.3.6.1.4.1.318.1.1.7.2.3.14- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- dm3ConfigBattery
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | tempcompOn |
2 | tempcompOff |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dm3ConfigBattFloatVolt mandatory Battery Float Voltage. This setting controls the power plant voltage.
Values are represented in thousandths of Volts (mV).
Attempts to set the value above or below the… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.1 |
| dm3ConfigBattHighTempAlarm mandatory For the Battery High Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be … | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.10 |
| dm3ConfigBattLowTempThresh mandatory Battery low temperature threshold. If system battery temperature is under threshold
a battery low temperature alarm will occur.
Values are represented in thousandths o… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.11 |
| dm3ConfigBattLowTempAlarm mandatory For the Battery Low Temperature Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be a… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.12 |
| dm3ConfigBattAmpHour mandatory Battery Amp-Hour Size. Units are thousandths of Amp hours (mAHr).
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.13 |
| dm3ConfigCompTempCoeff mandatory Compensation Temperature Coefficient. (uV/degC/cell).
Units are presented in microvolts.
Attempts to set the value above or below the acceptable range of the powerplant… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.15 |
| dm3ConfigHighKneeTemp mandatory High Knee for temperature compensation: Compensation temperature coefficient
becomes 0mV/degC/cell.
Values are represented in thousandths of degrees Celsius.
Attempts … | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.16 |
| dm3ConfigLowKneeTemp mandatory Low Knee for temperature compensation: Compensation temperature coefficient
becomes 0mV/degC/cell.
Values are represented in thousandths of degrees Celsius.
Attempts t… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.17 |
| dm3ConfigBattHwCurrentAlarm mandatory For the Battery Current Hardware Alarm (indicating current is outside realistic
limits, or a possible measurement fault;
Setting this OID to alarmIgnore (1) results in the alarm c… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.18 |
| dm3ConfigBattHwTempAlarm mandatory For the Battery Temperature Hardware Alarm (indicating temperature is outside realistic
limits, or a possible measurement fault;
Setting this OID to alarmIgnore (1) results in the… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.19 |
| dm3ConfigBattMaxRecharge mandatory Battery Maximum Recharge Rate. This setting controls the battery max
recharge rate. The value is based on C/20 for 240 AHr battery string.
Values are represented in t… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.2 |
| dm3ConfigBattDischargeThresh mandatory Battery discharge threshold. If battery output current exceeds threshold
a battery discharge alarm will occur.
Values are represented in thousandths of Amps (mA).
Atte… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.3 |
| dm3ConfigBattDischargeAlarm mandatory For the Battery Discharge Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activat… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.4 |
| dm3ConfigBattHighVoltThresh mandatory Battery high voltage threshold. If system battery voltage exceeds threshold
a battery high voltage alarm will occur.
Values are represented in thousandths of Volts (mV… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.5 |
| dm3ConfigBattHighVoltAlarm mandatory For the Battery High Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be acti… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.6 |
| dm3ConfigBattLowVoltThresh mandatory Battery low voltage threshold. If system battery voltage is under threshold
a battery low voltage alarm will occur.
Values are represented in thousandths of Volts (mV)… | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.7 |
| dm3ConfigBattLowVoltAlarm mandatory For the Battery Low Voltage Alarm;
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activ… | scalar | Enumeration | .1.3.6.1.4.1.318.1.1.7.2.3.8 |
| dm3ConfigBattHighTempThresh mandatory Battery high temperature threshold. If system battery temperature exceeds threshold
a battery high temperature alarm will occur.
Values are represented in thousandths … | scalar | Integer32 | .1.3.6.1.4.1.318.1.1.7.2.3.9 |