battManConfigMonitorWireLength

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.16.6.17
MIB view Table view

Object

scalar mandatory r/w Enumeration 
The monitor wire length:
fiftyFeetOrLess (1) indicates that the wire length is less than or equal to 50 feet.
moreThanFiftyFeet (2) indicates that the wire length is greater than 50 feet.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.16.6.17
Type
scalar
Access
readwrite
Status
mandatory
Parent
battManConfig
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1fiftyFeetOrLess
2moreThanFiftyFeet

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
battManConfigApplication obsolete
This OID has been deprecated.
scalarEnumeration.1.3.6.1.4.1.318.1.1.16.6.1
battManConfigMaxPilotTempC mandatory
The maximum pilot battery temperature alarm limit in tenths of degrees Celsius.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.10
battManConfigMaxAmbientTempF mandatory
The maximum ambient temperature alarm limit in tenths of degrees Fahrenheit.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.11
battManConfigMaxAmbientTempC mandatory
The maximum ambient temperature alarm limit in tenths of degrees Celsius.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.12
battManConfigMinAmbientTempF mandatory
The Minimum Ambient Temperature alarm limit in tenths of degrees Fahrenheit.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.13
battManConfigMinAmbientTempC mandatory
The Minimum Ambient Temperature alarm limit in tenths of degrees Celsius.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.14
battManConfigMaxRippleCurrent mandatory
The maximum ripple current alarm limit for the monitored battery strings in percent of AH capacity.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.15
battManConfigMaxCurrentAcceptanceDeviation mandatory
The maximum current acceptance deviation alarm limit in percent.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.16
battManConfigDischargeVoltageAlarmLevel mandatory
The discharge voltage alarm level in percent.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.18
battManConfigAutoAnnunciatorReset mandatory
The annunciator output signal reset method: disabled(1) means the annunciator signal output will be reset when the reset button is pressed. enabled(2) means the annunciator will s…
scalarEnumeration.1.3.6.1.4.1.318.1.1.16.6.19
battManConfigBatteryChemistry mandatory
The battery chemistry of the monitored batteries: LeadAcid(1) Lead Acid or Nickel-Cadmium(2) Nickel-Cadmium.
scalarEnumeration.1.3.6.1.4.1.318.1.1.16.6.2
battManConfigSuspendCellVoltage mandatory
This is used along with the number of cells per battery and the number of batteries per string to determine if a battery string has violated the low voltage limit. If so, the Batt…
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.20
battManConfigOhmicTestWaitTime mandatory
The amount of time in seconds after a discharge event before data will be collected for the ohmic value calculation.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.21
battManConfigNumberOfBoosts mandatory
The number of consecutive times the Battery Management System applies a charge to each battery during a boost cycle. Batteries with a Rated Battery AH Capacity less than or equal…
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.22
battManConfigBatteryAHCapacity mandatory
The amp hour capacity of the monitored batteries 5-4000 AH.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.3
battManConfigNumberofStrings mandatory
The number of strings in the battery manager system.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.4
battManConfigBatteriesperString mandatory
The number of batteries per string.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.5
battManConfigCellsperBattery mandatory
The number of cells per battery (1, 2, 4 or 6 for lead-acid, 1 or 2 for NiCd.
scalarEnumeration.1.3.6.1.4.1.318.1.1.16.6.6
battManConfigMinCellVoltage mandatory
The minimum battery cell voltage alarm limit in millivolts DC.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.7
battManConfigMaxCellVoltage mandatory
The maximum battery cell voltage alarm limit in millivolts DC.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.8
battManConfigMaxPilotTempF mandatory
The maximum pilot battery temperature alarm limit in tenths of degrees Fahrenheit.
scalarInteger32.1.3.6.1.4.1.318.1.1.16.6.9