atsConfigCurrentLimit

PowerNet-MIB · .1.3.6.1.4.1.318.1.1.8.4.6
MIB view Table view

Object

scalar mandatory r/w Integer32 
The threshold (in Amps) at which an Over Current Alarm will be generated.
This OID returns the overload threshold value of the
OID atsConfigPhaseOverLoadThreshold for the 1U ATS and
OID atsConfigBankOverLoadThreshold of total for the 2U ATS.
Setting this OID does not have any impact on the device.

Context

MIB
PowerNet-MIB
OID
.1.3.6.1.4.1.318.1.1.8.4.6
Type
scalar
Access
readwrite
Status
mandatory
Parent
atsConfig
Siblings
17

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atsConfigProductName mandatory
A configurable character string.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.8.4.1
atsConfigLineVRMSMediumLimit mandatory
To configure the Line VRMS Medium Limit.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.10
atsConfigLineVRMSWideLimit mandatory
To configure the Line VRMS Wide Limit.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.11
atsConfigFrequencyDeviation mandatory
To configure the frequency deviation. AP77xx units may use 1, 2, or 3 (Hz). AP44xx and AP44xxA units may use 3, 5, or 10 (Hz).
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.12
atsConfigBankTableSize mandatory
The size of the bank table.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.13
atsConfigBankTable mandatory
Allows for configuration of each ATS bank.
table-.1.3.6.1.4.1.318.1.1.8.4.14
atsConfigPhaseTableSize mandatory
The size of the phase table.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.15
atsConfigPhaseTable mandatory
Allows for configuration of each ATS phase.
table-.1.3.6.1.4.1.318.1.1.8.4.16
atsConfigDeviceLocation mandatory
A user-defined string identifying the location of the ATS
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.8.4.17
atsConfigContact mandatory
A user-defined string identifying the person to contact regarding the ATS
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.318.1.1.8.4.18
atsConfigPreferredSource mandatory
This variable returns the preferred source of power when both sources are OK.
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.2
atsConfigFrontPanelLockout mandatory
Setting this variable to disableFrontPanel(1), prevents source preference configuration of the Automatic Transfer Switch via the Front Panel. Setting this variable to enableFrontP…
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.3
atsConfigVoltageSensitivity mandatory
This variable defines the sensitivity to changes in voltage: high(1) for best protection, low(2) for frequent small line voltage changes.
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.4
atsConfigTransferVoltageRange mandatory
This variable defines the range of acceptable voltage from a power source. If the voltage measured from the selected input source is not within this range, the Automatic Transfer …
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.5
atsConfigResetValues mandatory
Resets the ATS configuration to its default values. Returns (-1) if not supported.
scalarEnumeration.1.3.6.1.4.1.318.1.1.8.4.7
atsConfigLineVRMS mandatory
To configure the input RMS voltage.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.8
atsConfigLineVRMSNarrowLimit mandatory
To configure the Line VRMS Narrow Limit.
scalarInteger32.1.3.6.1.4.1.318.1.1.8.4.9