pmPowerMgmtSensorsTableValueReset

PM-MIB · .1.3.6.1.4.1.10418.17.2.5.13.1.30
MIB view Table view

Object

column r/w Enumeration 
noAction(1) = always returned in a GET. Does nothing if SET.
reset(2)  = when SET the reset command is sent to sensor.

Context

MIB
PM-MIB
OID
.1.3.6.1.4.1.10418.17.2.5.13.1.30
Type
column
Access
readwrite
Status
current
Parent
pmPowerMgmtSensorsTableEntry
Table
pmPowerMgmtSensorsTable
Siblings
29

Syntax

Enumeration

Values & Constraints

Enumerated Values
1noAction
2reset

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pmPowerMgmtSensorsTablePortNumber
Serial Port number.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.13.1.1
pmPowerMgmtSensorsTablePduNumber
Index.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.13.1.2
pmPowerMgmtSensorsTableValue
Actual value of the sensor. Returns N/A if not applicable.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.20
pmPowerMgmtSensorsTableValueMax
Maximum value of the sensor. Returns N/A if not applicable.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.21
pmPowerMgmtSensorsTableValueMin
Minimum value of the sensor. Returns N/A if not applicable.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.22
pmPowerMgmtSensorsTableValueAvg
Average value of the sensor. Returns N/A if not applicable.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.23
pmPowerMgmtSensorsTableValueInt
Actual value of the sensor. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.25
pmPowerMgmtSensorsTableValueMaxInt
Maximum value of the sensor. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.26
pmPowerMgmtSensorsTableValueMinInt
Minimum value of the sensor. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.27
pmPowerMgmtSensorsTableValueAvgInt
Average value of the sensor. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.28
pmPowerMgmtSensorsTableNumber
Number of the sensor in the PDU.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.17.2.5.13.1.3
pmPowerMgmtSensorsTableName
Name of the sensor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.4
pmPowerMgmtSensorsTableHighCritical
sensor high critical (alarm) threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is lower that CurrentHighWarning. Returns 0 if not sup…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.40
pmPowerMgmtSensorsTableHighWarning
sensor high warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than HighCritical or lower than LowWarning. Returns 0…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.41
pmPowerMgmtSensorsTableLowWarning
sensor low warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than HighWarning or lower than LowCritical. Returns 0 …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.42
pmPowerMgmtSensorsTableLowCritical
sensor low critical threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than LowWarning. Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.43
pmPowerMgmtSensorsTableUnit
sensor unit. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.13.1.45
pmPowerMgmtSensorsTablePortName
Serial Port Name where the PDU is connected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.5
pmPowerMgmtSensorsTableHighCriticalC
sensor high critical (alarm) threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.50
pmPowerMgmtSensorsTableHighWarningC
sensor high warning threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.51
pmPowerMgmtSensorsTableLowWarningC
sensor low warning threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.52
pmPowerMgmtSensorsTableLowCriticalC
sensor low critical threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.53
pmPowerMgmtSensorsTablePduId
PDU identification.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.17.2.5.13.1.6
pmPowerMgmtSensorsTableHighCriticalF
sensor high critical (alarm) threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.60
pmPowerMgmtSensorsTableHighWarningF
sensor high warning threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.61
pmPowerMgmtSensorsTableLowWarningF
sensor low warning threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.62
pmPowerMgmtSensorsTableLowCriticalF
sensor low critical threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.17.2.5.13.1.63
pmPowerMgmtSensorsTableType
The type of environmental monitor. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.13.1.7
pmPowerMgmtSensorsTableStatus
Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor. Returns 0 if not supported.
columnEnumeration.1.3.6.1.4.1.10418.17.2.5.13.1.8