pmPowerMgmtSensorsTableStatus
PM-MIB ·
.1.3.6.1.4.1.10418.17.2.5.13.1.8
Object
column
Enumeration
Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor. Returns 0 if not supported.
Context
- MIB
- PM-MIB
- OID
.1.3.6.1.4.1.10418.17.2.5.13.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pmPowerMgmtSensorsTableEntry
- Table
- pmPowerMgmtSensorsTable
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | triggered |
3 | not-applicable |
4 | opened |
5 | closed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pmPowerMgmtSensorsTablePortNumber Serial Port number. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.13.1.1 |
| pmPowerMgmtSensorsTablePduNumber Index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.13.1.2 |
| pmPowerMgmtSensorsTableValue Actual value of the sensor.
Returns N/A if not applicable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.20 |
| pmPowerMgmtSensorsTableValueMax Maximum value of the sensor.
Returns N/A if not applicable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.21 |
| pmPowerMgmtSensorsTableValueMin Minimum value of the sensor.
Returns N/A if not applicable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.22 |
| pmPowerMgmtSensorsTableValueAvg Average value of the sensor.
Returns N/A if not applicable. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.23 |
| pmPowerMgmtSensorsTableValueInt Actual value of the sensor.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.25 |
| pmPowerMgmtSensorsTableValueMaxInt Maximum value of the sensor.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.26 |
| pmPowerMgmtSensorsTableValueMinInt Minimum value of the sensor.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.27 |
| pmPowerMgmtSensorsTableValueAvgInt Average value of the sensor.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.28 |
| pmPowerMgmtSensorsTableNumber Number of the sensor in the PDU. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.17.2.5.13.1.3 |
| pmPowerMgmtSensorsTableValueReset noAction(1) = always returned in a GET. Does nothing if SET.
reset(2) = when SET the reset command is sent to sensor. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.13.1.30 |
| pmPowerMgmtSensorsTableName Name of the sensor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.4 |
| pmPowerMgmtSensorsTableHighCritical sensor high critical (alarm) threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit.
Set fails if value is lower that CurrentHighWarning.
Returns 0 if not sup… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.40 |
| pmPowerMgmtSensorsTableHighWarning sensor high warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit.
Set fails if value is higher than HighCritical or lower than LowWarning.
Returns 0… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.41 |
| pmPowerMgmtSensorsTableLowWarning sensor low warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit.
Set fails if value is higher than HighWarning or lower than LowCritical.
Returns 0 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.42 |
| pmPowerMgmtSensorsTableLowCritical sensor low critical threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit.
Set fails if value is higher than LowWarning.
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.43 |
| pmPowerMgmtSensorsTableUnit sensor unit.
Returns 0 if not supported. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.13.1.45 |
| pmPowerMgmtSensorsTablePortName Serial Port Name where the PDU is connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.5 |
| pmPowerMgmtSensorsTableHighCriticalC sensor high critical (alarm) threshold (Celcius x 10).
to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.50 |
| pmPowerMgmtSensorsTableHighWarningC sensor high warning threshold (Celcius x 10).
to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.51 |
| pmPowerMgmtSensorsTableLowWarningC sensor low warning threshold (Celcius x 10).
to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.52 |
| pmPowerMgmtSensorsTableLowCriticalC sensor low critical threshold (Celcius x 10).
to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.53 |
| pmPowerMgmtSensorsTablePduId PDU identification. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.17.2.5.13.1.6 |
| pmPowerMgmtSensorsTableHighCriticalF sensor high critical (alarm) threshold (Fahrenheit x 10).
to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.60 |
| pmPowerMgmtSensorsTableHighWarningF sensor high warning threshold (Fahrenheit x 10).
to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.61 |
| pmPowerMgmtSensorsTableLowWarningF sensor low warning threshold (Fahrenheit x 10).
to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.62 |
| pmPowerMgmtSensorsTableLowCriticalF sensor low critical threshold (Fahrenheit x 10).
to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit).
Returns 0 if not supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.17.2.5.13.1.63 |
| pmPowerMgmtSensorsTableType The type of environmental monitor.
Returns 0 if not supported. | column | Enumeration | .1.3.6.1.4.1.10418.17.2.5.13.1.7 |