serverInfo

PERLE-IOLAN-SDS-MIB · .1.3.6.1.4.1.1966.12.1.2
MIB view Table view

Object

node

No description available.

Context

MIB
PERLE-IOLAN-SDS-MIB
OID
.1.3.6.1.4.1.1966.12.1.2
Type
node
Parent
sdsMIBObjects
Siblings
57
Children
94

Syntax

No syntax metadata recorded.

Values & Constraints

Object Constraints
range: 1-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adminInfonode-.1.3.6.1.4.1.1966.12.1.1
kerberosInfonode-.1.3.6.1.4.1.1966.12.1.10
ldapInfonode-.1.3.6.1.4.1.1966.12.1.11
tacacsInfonode-.1.3.6.1.4.1.1966.12.1.12
securidInfonode-.1.3.6.1.4.1.1966.12.1.13
nisInfonode-.1.3.6.1.4.1.1966.12.1.14
sshServerInfonode-.1.3.6.1.4.1.1966.12.1.15
defUserInfonode-.1.3.6.1.4.1.1966.12.1.16
snmpInfonode-.1.3.6.1.4.1.1966.12.1.17
dnsInfonode-.1.3.6.1.4.1.1966.12.1.18
winsInfonode-.1.3.6.1.4.1.1966.12.1.19
gatewayInfonode-.1.3.6.1.4.1.1966.12.1.20
syslogInfonode-.1.3.6.1.4.1.1966.12.1.21
emailInfonode-.1.3.6.1.4.1.1966.12.1.22
ripInfonode-.1.3.6.1.4.1.1966.12.1.23
timeInfonode-.1.3.6.1.4.1.1966.12.1.24
fileInfonode-.1.3.6.1.4.1.1966.12.1.25
sntpStatsInfonode-.1.3.6.1.4.1.1966.12.1.27
ripTableInfonode-.1.3.6.1.4.1.1966.12.1.28
tcpConnStatsInfonode-.1.3.6.1.4.1.1966.12.1.29
hostsInfonode-.1.3.6.1.4.1.1966.12.1.3
udpConnStatsInfonode-.1.3.6.1.4.1.1966.12.1.30
ipv6StatsInfonode-.1.3.6.1.4.1.1966.12.1.31
icmpv6StatsInfonode-.1.3.6.1.4.1.1966.12.1.32
udpv6StatsInfonode-.1.3.6.1.4.1.1966.12.1.33
tcpConnv6StatsInfonode-.1.3.6.1.4.1.1966.12.1.34
udpConnv6StatsInfonode-.1.3.6.1.4.1.1966.12.1.35
routev6Infonode-.1.3.6.1.4.1.1966.12.1.36
ripv6TableInfonode-.1.3.6.1.4.1.1966.12.1.37
interfacev6Infonode-.1.3.6.1.4.1.1966.12.1.38
sslInfonode-.1.3.6.1.4.1.1966.12.1.39
userInfonode-.1.3.6.1.4.1.1966.12.1.4
consoleInfonode-.1.3.6.1.4.1.1966.12.1.40
ethStatsInfonode-.1.3.6.1.4.1.1966.12.1.41
modbusGatewayInfonode-.1.3.6.1.4.1.1966.12.1.42
modbusStatsInfonode-.1.3.6.1.4.1.1966.12.1.43
customAppServerInfonode-.1.3.6.1.4.1.1966.12.1.44
ioInfonode-.1.3.6.1.4.1.1966.12.1.45
clusteringInfonode-.1.3.6.1.4.1.1966.12.1.46
dynamicDNSInfonode-.1.3.6.1.4.1.1966.12.1.47
pciInfonode-.1.3.6.1.4.1.1966.12.1.48
vmodemPhoneInfonode-.1.3.6.1.4.1.1966.12.1.49
portInfonode-.1.3.6.1.4.1.1966.12.1.5
ipsecInfonode-.1.3.6.1.4.1.1966.12.1.50
ipv6Infonode-.1.3.6.1.4.1.1966.12.1.51
l2tpInfonode-.1.3.6.1.4.1.1966.12.1.52
vpnexceptionInfonode-.1.3.6.1.4.1.1966.12.1.53
httpTunInfonode-.1.3.6.1.4.1.1966.12.1.54
sftpInfonode-.1.3.6.1.4.1.1966.12.1.55
wlanInfonode-.1.3.6.1.4.1.1966.12.1.56
wwanInfonode-.1.3.6.1.4.1.1966.12.1.57
sfpInfonode-.1.3.6.1.4.1.1966.12.1.58
frontPanelInfonode-.1.3.6.1.4.1.1966.12.1.59
modemInfonode-.1.3.6.1.4.1.1966.12.1.6
servicesInfonode-.1.3.6.1.4.1.1966.12.1.7
trueportInfonode-.1.3.6.1.4.1.1966.12.1.8
radiusInfonode-.1.3.6.1.4.1.1966.12.1.9
Child Objects
ObjectTypeSyntaxOID
serverStatus
When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the contai…
scalarContainerStatus.1.3.6.1.4.1.1966.12.1.2.1
serverNFSHostName
The NFS host that the Device Server will use for its Remote Port Buffering feature. The Device Server will open a file on the NFS host for each reverse SSH or reverse Telnet line,…
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.10
serverNFSDirectory
The directory and/or subdirectories where the Remote Port Buffering files will be created. This field is used when Port Buffering Mode is set to Remote or Both. For multiple Devic…
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.11
serverNFSEncryption
Determines if the data sent to the NFS host is sent encrypted or in the clear across the LAN. The default is set of Off. NOTE: When NFS encryption is enabled, the Decoder utility …
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.12
serverPortMenuString
The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify control (unprintable) co…
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.13
serverBreakEnabled
Enables/disables proprietary inband SSH break signal processing as well as the existing Reverse Telnet break signal. This parameter can also enable/disable the out-of-band break …
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.15
serverBanner
If enabled, displays a product identification banner before login prompts. Default is off.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.16
serverSecurity
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the hosts table.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.17
serverPromptWithName
If enabled, the Device Server name will be included in login prompts, command line prompts, etc.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.18
serverPasswordLimit
The number of attempts a user is allowed to enter a password for a port. If this limit is exceeded, the port is disabled for 5 minutes. A user with Admin level rights can restart …
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.19
serverName
The name of the Device Server.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.2
serverOemLogin
When set, and a custom language file is in use, the login prompt will use the string defined in the language file as the login prompt instead of the default prompt, login:.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.20
serverBypassPassword
When set, authorized users who do not have a password set, with the exception of the Admin user, WILL NOT be prompted for a password at login with Local Authentication.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.21
serverSingleTelnet
Sets all reverse connections to a one connection at a time mode. Server-side applications will get a (socket) connection refused until: All data from previous connections on that …
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.22
serverFlushOnClose
When enabled, deletes any pending data when a port is closed; as opposed to maintaining the port to send pending data. Default is Off.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.23
serverPrimaryAuthMethod
The first authentication method that the Device Server attempts. Some type of authentication must be done by the Device Server.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.24
serverSecondaryAuthMethod
If the Primary Authentication Method fails, the next authentication method that the Device Server attempts. You can choose to use authentication methods in combination. For exampl…
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.25
serverEthernetSpeedDuplex
Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Duplex 100 Mbps Half D…
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.26
serverTFTPRetry
The number of times the Device Server will attempt to transfer (using TFTP) a file to/from a host. Default is 5. A value of 0 (zero) means that the Device Server will not attempt …
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.27
serverTFTPTimeOut
The time, in seconds, that the Device Server will wait for a successful transmit or receipt of TFTP packets before retrying a TFTP transfer. Default is 3 seconds.
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.28
serverEnableGuestLogin
Allow users who are not defined in the User database to log into the Device Server with any user ID and the specified password. Guest users inherit their settings from the Defaul…
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.29
serverDomainName
The domain name of the Device Server.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.3
serverSecondaryIPaddress
The Device Server's eth2 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.30
serverSecondarySubnetBits
The number of bits in the eth2 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the …
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.31
serverEthSecondarySpeedDuplex
Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Duplex 100 Mbps Half D…
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.32
serverDHCPUpdateDNSPrimary
If enabled, the DNS server will be updated after the device server gets the IP address via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.33
serverPowerManagementMenuString
Menu String for power management .
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.34
serverActiveStandbyEnabled
Enable/disable active standby.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.35
serverActiveStandbyMiimon
Time in msec for frequency in MII link monitoring.
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.36
serverActiveStandbyUpdelay
Delay in enabling a link after the 'link up' status has been detected
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.37
serverDropSessionDetectionTime
Dropped session detection time
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.38
serverAutoObtainDNS
If enabled, the DNS server IP address will be get automatically via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.39
serverIPaddress
The Device Server's unique IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.4
serverAutoObtainWINS
If enabled, the WINS server IP address will be get automatically via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.40
serverAutoObtainGW
If enabled, the default gateway IP address will be get automatically via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.41
serverAlwaysAttemptSecond
If enabled, the secondary authentication method will always be used.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.42
serverDHCPUpdateDNSSecondary
If enabled, the DNS server will be updated for the secondary Ethernet interface after the device server gets the IP address via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.43
serverDomainPrefixPrimary
The domain prefix for primary Ethernet interface of the Device Server.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.44
serverDomainPrefixSecondary
The domain prefix for secondary Ethernet interface of the Device Server.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.45
serverPortBufferSyslog
Output port buffer to syslog.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.46
serverPortBufferKeyStroke
Turn on port buffer keystroke.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.47
serverIpsecUseNat
Enable or disable NAT traversal for IPsec.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.48
serverAutoObtainDNSV6
If enabled, the DNS server IP address will be obtained automatically via DHCPv6.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.49
serverSubnetBits
The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the corre…
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.5
serverAuthenticateAdminlocal
If enabled, admin user will be only authenticated locally.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.50
serverDisplayMotdWeb
If enabled, the WebManager will display message of the day.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.51
serverGenericWebLoginScreen
If enabled, the WebManager will not display device server's information on login screen.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.52
serverNfsHostTunnel
The HTTP tunnel associated with the port buffering NFS host.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.54
serverPortBufferSyslogLevel
Specify the syslog level to use for port buffering
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.55
serverEasyPortWebClient
Specifies the telnet/SSH client for EasyPortWeb. Select 'java' to use the Java applet client. Select 'javascript' to use the web browser-based client.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.56
serverDataLoggingBufferSize
Specifies the buffer size for Data Logging.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.57
serverDataLoggingOptions
Specifies whether data logging should be backword compatible with versions of firmware prior to Version 4.3.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.58
serverKeepAliveRetries
Specifies the number of time the iolan will retry the TCP keepalive message.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.59
serverPortBuffering
Specifies where the port buffer log is kept, either Off, Local, Remote, or Both. If Remote or Both is selected, you must specify an NFS server location for the port buffer log.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.6
serverKeepAliveTimeout
Specifies the time to wait for a tcp keepalive message response.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.60
serverEth0MTU
Specifies the size of the ethernet MTU.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.61
serverEth1MTU
Specifies the size of the ethernet MTU.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.62
serverTFTPHost
The name of the TFTP host.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.63
serverTFTPTunnelName
The name of the HTTP tunnel associated with this service.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.64
serverSecurityRange
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.65
serverRangeStartIPaddress
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.66
serverRangeEndIPaddress
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.67
serverAccountLockOut
If enabled, the server will lock out the user after a number of invalid login attempts.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.68
serverLoginOnce
If enabled, the server will only allow a user to login once.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.69
serverViewPortBufferString
The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify control (unprintable) co…
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.7
serverPasswordRules
If enabled, the server will enforce the password rules for the user password.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.70
serverDisableWebCaching
If enabled, the server will disable caching in the web browser.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.71
serverDisableIpForwarding
If enabled, the server will disable IP forwarding between ethernet interfaces.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.72
serverSecurityRange2
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.73
serverRangeStartIPaddress2
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.74
serverRangeEndIPaddress2
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.75
serverSecurityRange3
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.76
serverRangeStartIPaddress3
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.77
serverRangeEndIPaddress3
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.78
serverSecurityRange4
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.79
serverTimeStamping
Enable/disable time stamping of the port buffer data.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.8
serverRangeStartIPaddress4
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.80
serverRangeEndIPaddress4
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.81
serverSecurityRange5
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.82
serverRangeStartIPaddress5
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.83
serverRangeEndIPaddress5
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.84
serverSecurityRange6
If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.85
serverRangeStartIPaddress6
The start IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.86
serverRangeEndIPaddress6
The end IP address of the range that the server will only respond to, and allow access to and from.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.87
serverIPaddress3
The Device Server's eth3 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1966.12.1.2.88
serverSubnetBits3
The number of bits in the eth3 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the …
scalarInteger32.1.3.6.1.4.1.1966.12.1.2.89
serverSessionEscapeString
The key sequence to escape the current session and display the session options.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.9
serverDHCPUpdateDNS3
If enabled, the DNS server will be updated for the third Ethernet interface after the device server gets the IP address via DHCP.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.90
serverDomainPrefix3
The domain prefix for third Ethernet interface of the Device Server.
scalarOctetString.1.3.6.1.4.1.1966.12.1.2.91
serverEth3MTU
Specifies the size of the third Ethernet MTU.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1966.12.1.2.92
serverEth1MediaType
For combo ports, specifies the combo port mode. If not supported, this object is not writeable.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.93
serverEth1Sgmii
For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.94
serverEth2MediaType
For combo ports, specifies the combo port mode. If not supported, this object is not writeable.
scalarEnumeration.1.3.6.1.4.1.1966.12.1.2.95
serverEth2Sgmii
For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable.
scalarOnOffValue.1.3.6.1.4.1.1966.12.1.2.96