serverBypassPassword
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.2.21
Object
scalar
r/w
OnOffValue
When set, authorized users who do not have a password set, with the exception of the Admin user, WILL NOT be prompted for a password at login with Local Authentication.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.2.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- serverInfo
- Siblings
- 93
Syntax
OnOffValue
- Source
- OnOffValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| serverStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | scalar | ContainerStatus | .1.3.6.1.4.1.1966.12.1.2.1 |
| serverNFSHostName The NFS host that the Device Server will use for
its Remote Port Buffering feature. The Device Server
will open a file on the NFS host for each reverse SSH
or reverse Telnet line,… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.10 |
| serverNFSDirectory The directory and/or subdirectories where the Remote Port
Buffering files will be created. This field is used when
Port Buffering Mode is set to Remote or Both. For multiple
Devic… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.11 |
| serverNFSEncryption Determines if the data sent to the NFS host is sent encrypted
or in the clear across the LAN. The default is set of Off.
NOTE: When NFS encryption is enabled, the Decoder utility
… | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.12 |
| serverPortMenuString The string (up to 8 characters) used by a a session connected
to a serial port to display the port buffer for that particular
serial port. You can specify control (unprintable) co… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.13 |
| serverBreakEnabled Enables/disables proprietary inband SSH break signal processing
as well as the existing Reverse Telnet break signal. This parameter
can also enable/disable the out-of-band break … | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.15 |
| serverBanner If enabled, displays a product identification banner before
login prompts. Default is off. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.16 |
| serverSecurity If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the hosts
table. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.17 |
| serverPromptWithName If enabled, the Device Server name will be included in login prompts,
command line prompts, etc. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.18 |
| serverPasswordLimit The number of attempts a user is allowed to enter a password
for a port. If this limit is exceeded, the port is disabled
for 5 minutes. A user with Admin level rights can restart … | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.19 |
| serverName The name of the Device Server. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.2 |
| serverOemLogin When set, and a custom language file is in use,
the login prompt will use the string defined in the
language file as the login prompt instead of the default prompt, login:. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.20 |
| serverSingleTelnet Sets all reverse connections to a one connection at a time mode.
Server-side applications will get a (socket) connection refused until:
All data from previous connections on that … | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.22 |
| serverFlushOnClose When enabled, deletes any pending data when a port is closed;
as opposed to maintaining the port to send pending data.
Default is Off. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.23 |
| serverPrimaryAuthMethod The first authentication method that the Device Server attempts.
Some type of authentication must be done by the Device Server. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.24 |
| serverSecondaryAuthMethod If the Primary Authentication Method fails, the next
authentication method that the Device Server attempts. You
can choose to use authentication methods in combination.
For exampl… | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.25 |
| serverEthernetSpeedDuplex Define the Ethernet connection speed at one of the following:
automatically detects the Ethernet interface speed and duplex
10 Mbps Half Duplex
10 Mbps Full Duplex
100 Mbps Half D… | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.26 |
| serverTFTPRetry The number of times the Device Server will attempt to
transfer (using TFTP) a file to/from a host. Default is 5.
A value of 0 (zero) means that the Device Server will not
attempt … | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.27 |
| serverTFTPTimeOut The time, in seconds, that the Device Server will wait for
a successful transmit or receipt of TFTP packets before retrying
a TFTP transfer. Default is 3 seconds. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.28 |
| serverEnableGuestLogin Allow users who are not defined in the User database to log
into the Device Server with any user ID and the specified password.
Guest users inherit their settings from the Defaul… | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.29 |
| serverDomainName The domain name of the Device Server. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.3 |
| serverSecondaryIPaddress The Device Server's eth2 IPv4 network IP address.
If you are using the Device Server in an IPv6 network,
this field can be left blank. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.30 |
| serverSecondarySubnetBits The number of bits in the eth2 subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
Valid values are 0-32. The default is 0. When the value
is 0, the … | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.31 |
| serverEthSecondarySpeedDuplex Define the Ethernet connection speed at one of the following:
automatically detects the Ethernet interface speed and duplex
10 Mbps Half Duplex
10 Mbps Full Duplex
100 Mbps Half D… | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.32 |
| serverDHCPUpdateDNSPrimary If enabled, the DNS server will be updated after the device server gets the
IP address via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.33 |
| serverPowerManagementMenuString Menu String for power management . | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.34 |
| serverActiveStandbyEnabled Enable/disable active standby. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.35 |
| serverActiveStandbyMiimon Time in msec for frequency in MII link monitoring. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.36 |
| serverActiveStandbyUpdelay Delay in enabling a link after the 'link up' status has been detected | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.37 |
| serverDropSessionDetectionTime Dropped session detection time | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.38 |
| serverAutoObtainDNS If enabled, the DNS server IP address will be get automatically via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.39 |
| serverIPaddress The Device Server's unique IPv4 network IP address.
If you are using the Device Server in an IPv6 network,
this field can be left blank. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.4 |
| serverAutoObtainWINS If enabled, the WINS server IP address will be get automatically via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.40 |
| serverAutoObtainGW If enabled, the default gateway IP address will be get automatically via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.41 |
| serverAlwaysAttemptSecond If enabled, the secondary authentication method will always be used. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.42 |
| serverDHCPUpdateDNSSecondary If enabled, the DNS server will be updated for the secondary Ethernet interface
after the device server gets the IP address via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.43 |
| serverDomainPrefixPrimary The domain prefix for primary Ethernet interface of the Device Server. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.44 |
| serverDomainPrefixSecondary The domain prefix for secondary Ethernet interface of the Device Server. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.45 |
| serverPortBufferSyslog Output port buffer to syslog. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.46 |
| serverPortBufferKeyStroke Turn on port buffer keystroke. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.47 |
| serverIpsecUseNat Enable or disable NAT traversal for IPsec. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.48 |
| serverAutoObtainDNSV6 If enabled, the DNS server IP address will be obtained automatically via DHCPv6. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.49 |
| serverSubnetBits The number of bits in the subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
Valid values are 0-32. The default is 0. When the value
is 0, the corre… | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.5 |
| serverAuthenticateAdminlocal If enabled, admin user will be only authenticated locally. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.50 |
| serverDisplayMotdWeb If enabled, the WebManager will display message of the day. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.51 |
| serverGenericWebLoginScreen If enabled, the WebManager will not display device server's information on login screen. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.52 |
| serverNfsHostTunnel The HTTP tunnel associated with the port buffering NFS host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.54 |
| serverPortBufferSyslogLevel Specify the syslog level to use for port buffering | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.55 |
| serverEasyPortWebClient Specifies the telnet/SSH client for EasyPortWeb. Select 'java'
to use the Java applet client. Select 'javascript' to use the
web browser-based client. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.56 |
| serverDataLoggingBufferSize Specifies the buffer size for Data Logging. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.57 |
| serverDataLoggingOptions Specifies whether data logging should be backword compatible with
versions of firmware prior to Version 4.3. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.58 |
| serverKeepAliveRetries Specifies the number of time the iolan will retry the TCP
keepalive message. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.59 |
| serverPortBuffering Specifies where the port buffer log is kept, either Off,
Local, Remote, or Both. If Remote or Both is selected,
you must specify an NFS server location for the port buffer log. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.6 |
| serverKeepAliveTimeout Specifies the time to wait for a tcp keepalive message response. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.60 |
| serverEth0MTU Specifies the size of the ethernet MTU. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.61 |
| serverEth1MTU Specifies the size of the ethernet MTU. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.62 |
| serverTFTPHost The name of the TFTP host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.63 |
| serverTFTPTunnelName The name of the HTTP tunnel associated with this service. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.64 |
| serverSecurityRange If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.65 |
| serverRangeStartIPaddress The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.66 |
| serverRangeEndIPaddress The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.67 |
| serverAccountLockOut If enabled, the server will lock out the user after a number of
invalid login attempts. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.68 |
| serverLoginOnce If enabled, the server will only allow a user to login once. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.69 |
| serverViewPortBufferString The string (up to 8 characters) used by a a session
connected to a serial port to display the port buffer for
that particular serial port. You can specify control
(unprintable) co… | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.7 |
| serverPasswordRules If enabled, the server will enforce the password rules for
the user password. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.70 |
| serverDisableWebCaching If enabled, the server will disable caching in the web browser. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.71 |
| serverDisableIpForwarding If enabled, the server will disable IP forwarding between
ethernet interfaces. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.72 |
| serverSecurityRange2 If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.73 |
| serverRangeStartIPaddress2 The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.74 |
| serverRangeEndIPaddress2 The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.75 |
| serverSecurityRange3 If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.76 |
| serverRangeStartIPaddress3 The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.77 |
| serverRangeEndIPaddress3 The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.78 |
| serverSecurityRange4 If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.79 |
| serverTimeStamping Enable/disable time stamping of the port buffer data. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.8 |
| serverRangeStartIPaddress4 The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.80 |
| serverRangeEndIPaddress4 The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.81 |
| serverSecurityRange5 If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.82 |
| serverRangeStartIPaddress5 The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.83 |
| serverRangeEndIPaddress5 The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.84 |
| serverSecurityRange6 If enabled, the server will only respond to, and allow access
to and from, the IP addresses of hosts configured in the range
of IP addresses. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.85 |
| serverRangeStartIPaddress6 The start IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.86 |
| serverRangeEndIPaddress6 The end IP address of the range that the server will only respond
to, and allow access to and from. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.87 |
| serverIPaddress3 The Device Server's eth3 IPv4 network IP address.
If you are using the Device Server in an IPv6 network,
this field can be left blank. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.2.88 |
| serverSubnetBits3 The number of bits in the eth3 subnet mask. For example,
a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.
Valid values are 0-32. The default is 0. When the value
is 0, the … | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.2.89 |
| serverSessionEscapeString The key sequence to escape the current session and
display the session options. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.9 |
| serverDHCPUpdateDNS3 If enabled, the DNS server will be updated for the third Ethernet interface
after the device server gets the IP address via DHCP. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.90 |
| serverDomainPrefix3 The domain prefix for third Ethernet interface of the Device Server. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.2.91 |
| serverEth3MTU Specifies the size of the third Ethernet MTU. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1966.12.1.2.92 |
| serverEth1MediaType For combo ports, specifies the combo port mode. If not supported, this object is not writeable. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.93 |
| serverEth1Sgmii For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media
Independent Interface) configured. If not supported, this object is not writeable. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.94 |
| serverEth2MediaType For combo ports, specifies the combo port mode. If not supported, this object is not writeable. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.2.95 |
| serverEth2Sgmii For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media
Independent Interface) configured. If not supported, this object is not writeable. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.2.96 |