radiusStatus
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.9.1
Object
scalar
r/w
ContainerStatus
When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.9.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- radiusInfo
- Siblings
- 19
Syntax
ContainerStatus
- Source
- ContainerStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | active |
2 | modified |
4 | applyChanges |
6 | discardChanges |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radiusRetryLimit The number of times the Device Server tries
to connect to the RADIUS server before erroring
out. Valid values are 0-255. The default is 5. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.10 |
| radiusTimeout The time, in seconds, that the Device Server waits
to receive a reply after sending out a request to
a RADIUS accounting or authentication host. If no
reply is received before the… | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.11 |
| radiusNasIdentifier The NAS identifier name.
To delete this , set this field to blank. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.12 |
| radiusNasIpAddress When on, the NAS Identifier obtains ipv4 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.13 |
| radiusNasSpecifyIpAddress Specify the unique IPv4 address that NAS Identifier will use | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.9.14 |
| radiusNasIpv6Address When on, the NAS Identifier obtains ipv6 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.15 |
| radiusNasSpecifyIpv6Address Specify the unique IPv6 address that NAS Identifier will use | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.12.1.9.16 |
| radiusPrimaryAuthTunnel Primary Radius Authentication Tunnel | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.17 |
| radiusSecondaryAuthTunnel Secondary Radius Authentication Tunnel | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.18 |
| radiusPrimaryAcctTunnel Name of the primary RADIUS authentication tunnel. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.19 |
| radiusPrimaryAuthHost Primary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.2 |
| radiusSecondaryAcctTunnel Name of the secondary RADIUS authentication tunnel. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.20 |
| radiusSecondaryAuthHost Secondary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.3 |
| radiusAuthenticationPort The port that the RADIUS host listens to for
authentication requests. The default port is 1812. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.4 |
| radiusAccountingEnabled Radius Accounting enabled | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.5 |
| radiusPrimaryAcctHost Name of the primary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.6 |
| radiusSecondaryAcctHost Name of the secondary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.7 |
| radiusAccountingPort The port that the RADIUS host listens to for
accounting requests. The default port is 1813. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.8 |
| radiusAcctAuth Radius Accounting Authenticator enabled | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.9 |