radiusNasSpecifyIpAddress
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.9.14
Object
Specify the unique IPv4 address that NAS Identifier will use
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.9.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- radiusInfo
- Siblings
- 19
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radiusStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | scalar | ContainerStatus | .1.3.6.1.4.1.1966.12.1.9.1 |
| radiusRetryLimit The number of times the Device Server tries
to connect to the RADIUS server before erroring
out. Valid values are 0-255. The default is 5. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.10 |
| radiusTimeout The time, in seconds, that the Device Server waits
to receive a reply after sending out a request to
a RADIUS accounting or authentication host. If no
reply is received before the… | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.11 |
| radiusNasIdentifier The NAS identifier name.
To delete this , set this field to blank. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.12 |
| radiusNasIpAddress When on, the NAS Identifier obtains ipv4 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.13 |
| radiusNasIpv6Address When on, the NAS Identifier obtains ipv6 address automatically.
Default is on. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.15 |
| radiusNasSpecifyIpv6Address Specify the unique IPv6 address that NAS Identifier will use | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.12.1.9.16 |
| radiusPrimaryAuthTunnel Primary Radius Authentication Tunnel | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.17 |
| radiusSecondaryAuthTunnel Secondary Radius Authentication Tunnel | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.18 |
| radiusPrimaryAcctTunnel Name of the primary RADIUS authentication tunnel. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.19 |
| radiusPrimaryAuthHost Primary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.2 |
| radiusSecondaryAcctTunnel Name of the secondary RADIUS authentication tunnel. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.20 |
| radiusSecondaryAuthHost Secondary Radius Authentication Host | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.3 |
| radiusAuthenticationPort The port that the RADIUS host listens to for
authentication requests. The default port is 1812. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.4 |
| radiusAccountingEnabled Radius Accounting enabled | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.5 |
| radiusPrimaryAcctHost Name of the primary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.6 |
| radiusSecondaryAcctHost Name of the secondary RADIUS authentication host. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.9.7 |
| radiusAccountingPort The port that the RADIUS host listens to for
accounting requests. The default port is 1813. | scalar | Integer32 | .1.3.6.1.4.1.1966.12.1.9.8 |
| radiusAcctAuth Radius Accounting Authenticator enabled | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.9.9 |