l2tpStatus
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.52.1
Object
scalar
r/w
ContainerStatus
When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.52.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- l2tpInfo
- Siblings
- 16
Syntax
ContainerStatus
- Source
- ContainerStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | active |
2 | modified |
4 | applyChanges |
6 | discardChanges |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l2tpOrganisationUnit Up to a 64 character entry for the unit in the
organization; for example, Payroll. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.10 |
| l2tpCommonName Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.11 |
| l2tpEmail Up to a 64 character entry for an email address;
for example, acct@anycompany.com. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.12 |
| l2tpPPPLocalIpAddr Specify the unique IPv4 address that hosts accessing the
Device Server through the L2TP tunnel will use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.13 |
| l2tpPPPRemoteStartIpAddr Specify the first IPv4 address that can be assigned to
incoming hosts through the L2TP tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.14 |
| l2tpPPPRemoteEndIpAddr Specify the end range of the IPv4 addresses that can be
assigned to incoming hosts through the L2TP tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.15 |
| l2tpPap Use the PAP authentication method that will be used for
the L2TP tunnel. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.52.16 |
| l2tpChap Use the CHAP authentication method that will be used for
the L2TP tunnel. This is the default. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.52.17 |
| l2tpIpsec When on, listens for L2TP/IPsec VPN tunnel connections.
Note: to allow non-VPN tunnel connections to the Device Server,
you must create entries in the VPN Exceptions list. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.52.2 |
| l2tpAuthMethod The type of authentication Method that the L2TP IPsec tunnel will use. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.52.3 |
| l2tpSecret The L2TP/IPsec and IPsec tunnel secret. This applies to all Shared
Secret VPN tunnels. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.4 |
| l2tpIpsecLocalIpAddr The IPv4 address that the Device Server will listen on for L2TP/IPsec
connections. If the default value (0.0.0.0) is kept, the Device Server
will use the Default Gateway value (i… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.5 |
| l2tpCountry A two character country code; for example, US. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.6 |
| l2tpStateProv Up to a 128 character entry for the state/province;
for example, IL. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.7 |
| l2tpLocality Up to a 128 character entry for the location;
for example, a city. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.8 |
| l2tpOrganisation Up to a 64 character entry for the organization;
for example, Accounting. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.9 |