l2tpChap
PERLE-IOLAN-SDS-MIB ·
.1.3.6.1.4.1.1966.12.1.52.17
Object
scalar
r/w
OnOffValue
Use the CHAP authentication method that will be used for the L2TP tunnel. This is the default.
Context
- MIB
- PERLE-IOLAN-SDS-MIB
- OID
.1.3.6.1.4.1.1966.12.1.52.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- l2tpInfo
- Siblings
- 16
Syntax
OnOffValue
- Source
- OnOffValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l2tpStatus When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the contai… | scalar | ContainerStatus | .1.3.6.1.4.1.1966.12.1.52.1 |
| l2tpOrganisationUnit Up to a 64 character entry for the unit in the
organization; for example, Payroll. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.10 |
| l2tpCommonName Up to a 64 character entry for common name; for example,
the host name or fully qualified domain name. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.11 |
| l2tpEmail Up to a 64 character entry for an email address;
for example, acct@anycompany.com. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.12 |
| l2tpPPPLocalIpAddr Specify the unique IPv4 address that hosts accessing the
Device Server through the L2TP tunnel will use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.13 |
| l2tpPPPRemoteStartIpAddr Specify the first IPv4 address that can be assigned to
incoming hosts through the L2TP tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.14 |
| l2tpPPPRemoteEndIpAddr Specify the end range of the IPv4 addresses that can be
assigned to incoming hosts through the L2TP tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.15 |
| l2tpPap Use the PAP authentication method that will be used for
the L2TP tunnel. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.52.16 |
| l2tpIpsec When on, listens for L2TP/IPsec VPN tunnel connections.
Note: to allow non-VPN tunnel connections to the Device Server,
you must create entries in the VPN Exceptions list. | scalar | OnOffValue | .1.3.6.1.4.1.1966.12.1.52.2 |
| l2tpAuthMethod The type of authentication Method that the L2TP IPsec tunnel will use. | scalar | Enumeration | .1.3.6.1.4.1.1966.12.1.52.3 |
| l2tpSecret The L2TP/IPsec and IPsec tunnel secret. This applies to all Shared
Secret VPN tunnels. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.4 |
| l2tpIpsecLocalIpAddr The IPv4 address that the Device Server will listen on for L2TP/IPsec
connections. If the default value (0.0.0.0) is kept, the Device Server
will use the Default Gateway value (i… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1966.12.1.52.5 |
| l2tpCountry A two character country code; for example, US. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.6 |
| l2tpStateProv Up to a 128 character entry for the state/province;
for example, IL. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.7 |
| l2tpLocality Up to a 128 character entry for the location;
for example, a city. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.8 |
| l2tpOrganisation Up to a 64 character entry for the organization;
for example, Accounting. | scalar | OctetString | .1.3.6.1.4.1.1966.12.1.52.9 |