wireSensorUpperWarningThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.8.4.1.24
Object
The upper warning threshold as an unsigned integer. The value of this OID variable should be scaled by wireSensorDecimalDigits. For example, if the value is 1 and wireSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled threshold exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.8.4.1.24- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- wireSensorConfigurationEntry
- Table
- wireSensorConfigurationTable
- Siblings
- 14
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wireSensorTolerance obsolete The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(wireSensorDecimalDigits + 1). For example, if t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.10 |
| wireSensorMaximum obsolete The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 and
wireSensorDecim… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.11 |
| wireSensorMinimum obsolete The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 and
wireSensorDeci… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.12 |
| wireSensorHysteresis obsolete The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.13 |
| wireSensorStateChangeDelay obsolete The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.14 |
| wireSensorLowerCriticalThreshold obsolete The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 and
wireSensorDecim… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.21 |
| wireSensorLowerWarningThreshold obsolete The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 and
wireSensorDecima… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.22 |
| wireSensorUpperCriticalThreshold obsolete The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 and
wireSensorDecim… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.23 |
| wireSensorEnabledThresholds obsolete A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.8.4.1.25 |
| wireSensorLogAvailable obsolete Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.8.4.1.4 |
| wireSensorUnits obsolete The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.8.4.1.6 |
| wireSensorDecimalDigits obsolete The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.7 |
| wireSensorAccuracy obsolete The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.8.4.1.8 |
| wireSensorResolution obsolete The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
wireSensorDecimalDigits. For example, if the value is 1 a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.8.4.1.9 |