rawConfigurationUpdated
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.0.116
Object
notification
A raw configuration update was applied on the device.
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapInformation | node | - | .1.3.6.1.4.1.13742.6.0.0 |
| systemStarted The system has started. | notification | - | .1.3.6.1.4.1.13742.6.0.1 |
| peripheralDeviceFirmwareUpdate The firmware update state of a peripheral device changed while
performing update to peripheralDevicePackageFirmwareVersion. | notification | - | .1.3.6.1.4.1.13742.6.0.100 |
| unitSensorReset An unit sensor was reset. | notification | - | .1.3.6.1.4.1.13742.6.0.101 |
| unitSensorStateChange Unit-level sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsUnitSensorValue is undefined for sensors which can
have negative readin… | notification | - | .1.3.6.1.4.1.13742.6.0.102 |
| circuitSensorStateChange BCM2/PMC branch circuit sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsCircuitSensorValue is undefined for sensors which can
have… | notification | - | .1.3.6.1.4.1.13742.6.0.103 |
| circuitPoleSensorStateChange BCM2/PMC circuit pole sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsCircuitPoleSensorValue is undefined for sensors which can
ha… | notification | - | .1.3.6.1.4.1.13742.6.0.104 |
| circuitAdded A new branch circuit has been configured | notification | - | .1.3.6.1.4.1.13742.6.0.105 |
| circuitDeleted A configured branch circuit has been deleted | notification | - | .1.3.6.1.4.1.13742.6.0.106 |
| circuitModified A configured branch circuit has been modified | notification | - | .1.3.6.1.4.1.13742.6.0.107 |
| circuitSensorReset An circuit sensor was reset. | notification | - | .1.3.6.1.4.1.13742.6.0.108 |
| powerMeterAdded A new power meter or panel has been configured | notification | - | .1.3.6.1.4.1.13742.6.0.109 |
| userAdded A user account was added to the system. | notification | - | .1.3.6.1.4.1.13742.6.0.11 |
| powerMeterDeleted A configured power meter has been deleted | notification | - | .1.3.6.1.4.1.13742.6.0.110 |
| powerMeterModified A configured power meter has been modified | notification | - | .1.3.6.1.4.1.13742.6.0.111 |
| smsMessageTransmissionFailure Sending an SMS message failed. | notification | - | .1.3.6.1.4.1.13742.6.0.112 |
| smartCardInserted A smartcard was inserted into a card reader. | notification | - | .1.3.6.1.4.1.13742.6.0.113 |
| smartCardRemoved A smartcard was removed from a card reader. | notification | - | .1.3.6.1.4.1.13742.6.0.114 |
| rawConfigurationDownloaded The raw configuration was downloaded from the device. | notification | - | .1.3.6.1.4.1.13742.6.0.115 |
| hwFailureStatusChanged A hardware component's failure state has changed. | notification | - | .1.3.6.1.4.1.13742.6.0.117 |
| outletGroupAdded A new outlet group has been configured | notification | - | .1.3.6.1.4.1.13742.6.0.118 |
| outletGroupModified A configured outlet group has been modified | notification | - | .1.3.6.1.4.1.13742.6.0.119 |
| userModified A user account was modified. | notification | - | .1.3.6.1.4.1.13742.6.0.12 |
| outletGroupDeleted A configured outlet group has been deleted | notification | - | .1.3.6.1.4.1.13742.6.0.120 |
| outletGroupSensorStateChange Outlet group sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsOutletGroupSensorValue is undefined for sensors which can
have negati… | notification | - | .1.3.6.1.4.1.13742.6.0.121 |
| outletGroupSensorReset An outlet group sensor was reset. | notification | - | .1.3.6.1.4.1.13742.6.0.122 |
| outletGroupPowerControl An outlet group switching operation has been performed. | notification | - | .1.3.6.1.4.1.13742.6.0.123 |
| serverPowerControlInitiated A server power control operation was initiated. | notification | - | .1.3.6.1.4.1.13742.6.0.124 |
| serverPowerControlCompleted A server power control operation has completed. | notification | - | .1.3.6.1.4.1.13742.6.0.125 |
| webcamStorageUploadStarted A new snapshot upload to webcam storage has started. | notification | - | .1.3.6.1.4.1.13742.6.0.126 |
| testEventTriggered A test event was triggered. | notification | - | .1.3.6.1.4.1.13742.6.0.127 |
| actuatorSwitched An actuator control operation has been performed. | notification | - | .1.3.6.1.4.1.13742.6.0.128 |
| keypadPinEntered A PIN was entered into a keypad. | notification | - | .1.3.6.1.4.1.13742.6.0.129 |
| userDeleted A user account was deleted from the system. | notification | - | .1.3.6.1.4.1.13742.6.0.13 |
| doorAccessGranted Door access was granted. | notification | - | .1.3.6.1.4.1.13742.6.0.130 |
| doorAccessDenied Door access was denied. | notification | - | .1.3.6.1.4.1.13742.6.0.131 |
| doorAccessRuleAdded A door access rule was added. | notification | - | .1.3.6.1.4.1.13742.6.0.132 |
| doorAccessRuleChanged A door access rule was changed. | notification | - | .1.3.6.1.4.1.13742.6.0.133 |
| doorAccessRuleDeleted A door access rule was deleted. | notification | - | .1.3.6.1.4.1.13742.6.0.134 |
| inletLinePairSensorStateChange Inlet line pair sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsInletLinePairSensorValue is undefined for sensors which can
have n… | notification | - | .1.3.6.1.4.1.13742.6.0.135 |
| tacPlusError A TACACS+ error occurred; errorDescription describes the error | notification | - | .1.3.6.1.4.1.13742.6.0.136 |
| outletSuspended An outlet was suspended after being suspected to have caused an OCP trip event. | notification | - | .1.3.6.1.4.1.13742.6.0.137 |
| userRenamed A user account was renamed. | notification | - | .1.3.6.1.4.1.13742.6.0.138 |
| roleAdded A role was added to the system. | notification | - | .1.3.6.1.4.1.13742.6.0.14 |
| roleModified A role was modified. | notification | - | .1.3.6.1.4.1.13742.6.0.15 |
| inletDipEvent Dip event on the inlet voltage sensor. | notification | - | .1.3.6.1.4.1.13742.6.0.151 |
| inletSwellEvent Dip event on the inlet voltage sensor. | notification | - | .1.3.6.1.4.1.13742.6.0.152 |
| inletPoleDipEvent Dip event on the voltage sensor of an inlet pole. | notification | - | .1.3.6.1.4.1.13742.6.0.153 |
| inletPoleSwellEvent Swell event on the voltage sensor of an inlet pole. | notification | - | .1.3.6.1.4.1.13742.6.0.154 |
| portFuseStateChange The state of a port fuse changed. | notification | - | .1.3.6.1.4.1.13742.6.0.155 |
| roleDeleted A role was deleted from the system. | notification | - | .1.3.6.1.4.1.13742.6.0.16 |
| systemReset The system was rebooted. | notification | - | .1.3.6.1.4.1.13742.6.0.2 |
| deviceUpdateStarted The device firmware update has started. | notification | - | .1.3.6.1.4.1.13742.6.0.20 |
| deviceUpdateCompleted The device firmware update has completed. | notification | - | .1.3.6.1.4.1.13742.6.0.21 |
| userBlocked A blocked user tried to log in. | notification | - | .1.3.6.1.4.1.13742.6.0.22 |
| powerControl An outlet switching operation has been performed.
Note that measurementsOutletSensorState represents the state of the outlet at the time the trap was sent.
This may be different f… | notification | - | .1.3.6.1.4.1.13742.6.0.23 |
| userPasswordChanged User password was changed. | notification | - | .1.3.6.1.4.1.13742.6.0.24 |
| passwordSettingsChanged Strong password settings changed. | notification | - | .1.3.6.1.4.1.13742.6.0.28 |
| userLogin A user logged in. | notification | - | .1.3.6.1.4.1.13742.6.0.3 |
| firmwareValidationFailed Validation of an uploaded firmware image failed. | notification | - | .1.3.6.1.4.1.13742.6.0.38 |
| userLogout A user logged out. | notification | - | .1.3.6.1.4.1.13742.6.0.4 |
| logFileCleared The event log has been cleared. | notification | - | .1.3.6.1.4.1.13742.6.0.41 |
| userAuthenticationFailure A user authentication attempt failed. | notification | - | .1.3.6.1.4.1.13742.6.0.5 |
| bulkConfigurationSaved A bulk configuration file was downloaded from the device. | notification | - | .1.3.6.1.4.1.13742.6.0.53 |
| bulkConfigurationCopied A bulk configuration file was copied to the device. | notification | - | .1.3.6.1.4.1.13742.6.0.54 |
| pduSensorStateChange deprecated Unit-level sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsUnitSensorValue is undefined for sensors which can
have negative readin… | notification | - | .1.3.6.1.4.1.13742.6.0.60 |
| inletSensorStateChange Inlet sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsInletSensorValue is undefined for sensors which can
have negative readings, … | notification | - | .1.3.6.1.4.1.13742.6.0.61 |
| inletPoleSensorStateChange Inlet pole sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsInletPoleSensorValue is undefined for sensors which can
have negative r… | notification | - | .1.3.6.1.4.1.13742.6.0.62 |
| outletSensorStateChange Outlet sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsOutletSensorValue is undefined for sensors which can
have negative readings… | notification | - | .1.3.6.1.4.1.13742.6.0.63 |
| outletPoleSensorStateChange Outlet pole sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsOutletPoleSensorValue is undefined for sensors which can
have negative… | notification | - | .1.3.6.1.4.1.13742.6.0.64 |
| overCurrentProtectorSensorStateChange Overcurrent protector sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsOverCurrentProtectorSensorValue is undefined for sensors whi… | notification | - | .1.3.6.1.4.1.13742.6.0.65 |
| externalSensorStateChange External sensor state change. | notification | - | .1.3.6.1.4.1.13742.6.0.66 |
| smtpMessageTransmissionFailure SMTP message transmission failure | notification | - | .1.3.6.1.4.1.13742.6.0.67 |
| ldapError An LDAP error occurred; errorDescription describes the error | notification | - | .1.3.6.1.4.1.13742.6.0.68 |
| deviceUpdateFailed The device firmware update has failed. | notification | - | .1.3.6.1.4.1.13742.6.0.70 |
| loadSheddingModeEntered The PDU has entered load shedding mode | notification | - | .1.3.6.1.4.1.13742.6.0.71 |
| loadSheddingModeExited The PDU has exited load shedding mode | notification | - | .1.3.6.1.4.1.13742.6.0.72 |
| pingServerEnabled The ping feature has been enabled for a server. | notification | - | .1.3.6.1.4.1.13742.6.0.73 |
| pingServerDisabled The ping feature has been disabled for a server. | notification | - | .1.3.6.1.4.1.13742.6.0.74 |
| serverNotReachable A monitored server has become unreachable. | notification | - | .1.3.6.1.4.1.13742.6.0.75 |
| serverReachable A monitored server has become reachable. | notification | - | .1.3.6.1.4.1.13742.6.0.76 |
| rfCodeTagConnected deprecated An RF-Code tag has been connected. | notification | - | .1.3.6.1.4.1.13742.6.0.77 |
| rfCodeTagDisconnected deprecated An RF-Code tag has been disconnected. | notification | - | .1.3.6.1.4.1.13742.6.0.78 |
| deviceIdentificationChanged A device identification parameter has been changed. | notification | - | .1.3.6.1.4.1.13742.6.0.79 |
| userSessionTimeout A user session timed out. | notification | - | .1.3.6.1.4.1.13742.6.0.8 |
| usbExpansionUnitConnected Connectivity to downstream expansion unit has been established.
It applies to the following interfaces:
USB
Ethernet
This trap is sent only if deviceCascadeType is portFor… | notification | - | .1.3.6.1.4.1.13742.6.0.80 |
| usbExpansionUnitDisconnected Connectivity to downstream expansion unit has been lost
It applies to the following interfaces:
USB
Ethernet
This trap is sent only if deviceCascadeType is portForwarding | notification | - | .1.3.6.1.4.1.13742.6.0.81 |
| lhxSupportChanged deprecated Schroff LHX support has been enabled or disabled. | notification | - | .1.3.6.1.4.1.13742.6.0.82 |
| userAcceptedRestrictedServiceAgreement A user accepted the Restricted Service Agreement. | notification | - | .1.3.6.1.4.1.13742.6.0.83 |
| userDeclinedRestrictedServiceAgreement A user declined the Restricted Service Agreement. | notification | - | .1.3.6.1.4.1.13742.6.0.84 |
| wireSensorStateChange obsolete Wire sensor state change. | notification | - | .1.3.6.1.4.1.13742.6.0.85 |
| transferSwitchSensorStateChange Transfer switch sensor state change.
Which value field to use depends on the metadata of the sensor.
measurementsTransferSwitchSensorValue is undefined for sensors which can
have … | notification | - | .1.3.6.1.4.1.13742.6.0.86 |
| deviceSettingsSaved A configuration backup has been downloaded from the device. | notification | - | .1.3.6.1.4.1.13742.6.0.88 |
| deviceSettingsRestored A configuration backup has been restored to the device. | notification | - | .1.3.6.1.4.1.13742.6.0.89 |
| webcamInserted A webcam has been connected. | notification | - | .1.3.6.1.4.1.13742.6.0.90 |
| webcamRemoved A webcam has been disconnected. | notification | - | .1.3.6.1.4.1.13742.6.0.91 |
| inletEnabled PDU operation has been enabled for an inlet | notification | - | .1.3.6.1.4.1.13742.6.0.92 |
| inletDisabled PDU operation has been disabled for an inlet | notification | - | .1.3.6.1.4.1.13742.6.0.93 |
| serverConnectivityUnrecoverable The connection to a monitored server could not be recovered. | notification | - | .1.3.6.1.4.1.13742.6.0.94 |
| radiusError A Radius error occurred; errorDescription describes the error | notification | - | .1.3.6.1.4.1.13742.6.0.95 |
| serverReachabilityError Server reachability error occurred; errorDescription describes the error.
This trap is sent when the Error state is entered.
Reasons for transitioning to the Error state include t… | notification | - | .1.3.6.1.4.1.13742.6.0.96 |
| inletSensorReset An inlet sensor was reset. | notification | - | .1.3.6.1.4.1.13742.6.0.97 |
| outletSensorReset An outlet sensor was reset. | notification | - | .1.3.6.1.4.1.13742.6.0.98 |
| unknownPeripheralDeviceAttached An unsupported peripheral device was attached. | notification | - | .1.3.6.1.4.1.13742.6.0.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pduName The user-defined name for the PDU. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.3.2.2.1.13 |
| userName The user currently logged in. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.0.0.1.1.2 |
| pxInetAddressType deprecated The type of address format
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.13742.6.3.2.2.1.50 |
| pxInetIPAddress deprecated The current IP address. A value of 0.0.0.0 indicates an error
or an unset option.
This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293).
For IPv6, its val… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.13742.6.3.2.2.1.51 |
| agentInetPortNumber The UDP port number used for accessing the SNMP agent on the device.
This is necessary to identify the expansion unit in a port forwarding cascade. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.13742.6.0.0.18 |
| RFC1213-MIBsysContact mandatory The textual identification of the contact person
for this managed node, together with information
on how to contact this person. | scalar | OctetString | .1.3.6.1.2.1.1.4 |
| RFC1213-MIBsysName mandatory An administratively-assigned name for this
managed node. By convention, this is the node's
fully-qualified domain name. | scalar | OctetString | .1.3.6.1.2.1.1.5 |
| RFC1213-MIBsysLocation mandatory The physical location of this node (e.g.,
`telephone closet, 3rd floor'). | scalar | OctetString | .1.3.6.1.2.1.1.6 |
| pduSerialNumber The PDU serial number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.13742.6.3.2.1.1.4 |
| pduNumber A unique value for each PDU or power meter. This is the same as
pduId, but for use in traps.
For BCM2 and PMC, pduNumber can be:
- 0 for the main controller
- T… | scalar | Integer32 | .1.3.6.1.4.1.13742.6.0.0.3 |