outletSensorLowerWarningThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.5.4.1.22
Object
The lower warning threshold as an unsigned integer. The value of this OID variable should be scaled by outletSensorDecimalDigits. For example, if the value is 1 and outletSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled threshold exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.5.4.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- outletSensorConfigurationEntry
- Table
- outletSensorConfigurationTable
- Siblings
- 20
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| outletSensorTolerance deprecated The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(outletSensorDecimalDigits + 1). For example, if… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.10 |
| outletSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.11 |
| outletSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.12 |
| outletSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.13 |
| outletSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.14 |
| outletSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.21 |
| outletSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.23 |
| outletSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.24 |
| outletSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.5.4.1.25 |
| outletSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.26 |
| outletSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.27 |
| outletSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.28 |
| outletSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDecim… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.29 |
| outletSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.30 |
| outletSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDecim… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.31 |
| outletSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.5.4.1.4 |
| outletSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.5.4.1.6 |
| outletSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.7 |
| outletSensorAccuracy deprecated The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.5.4.1.8 |
| outletSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.9 |