outletSensorEnabledThresholds
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.5.4.1.25
Object
column
r/w
Bits
A bit string indicating which thresholds are enabled. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.5.4.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- outletSensorConfigurationEntry
- Table
- outletSensorConfigurationTable
- Siblings
- 20
Syntax
Bits
Values & Constraints
Enumerated Values
0 | lowerCritical |
1 | lowerWarning |
2 | upperWarning |
3 | upperCritical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| outletSensorTolerance deprecated The tolerance: the maximum difference between measurement and the
actual value. The value of this OID variable should be scaled by
(outletSensorDecimalDigits + 1). For example, if… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.10 |
| outletSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.11 |
| outletSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.12 |
| outletSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.13 |
| outletSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.14 |
| outletSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.21 |
| outletSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.22 |
| outletSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorD… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.23 |
| outletSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.24 |
| outletSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.26 |
| outletSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.27 |
| outletSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.28 |
| outletSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDecim… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.29 |
| outletSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDeci… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.30 |
| outletSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1 and
outletSensorDecim… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.5.4.1.31 |
| outletSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.5.4.1.4 |
| outletSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.5.4.1.6 |
| outletSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.7 |
| outletSensorAccuracy deprecated The accuracy: the maximum relative difference (in percent) between
measurement and the actual value.
This parameter does not apply to sensors without numerical reading. | column | HundredthsOfAPercentage | .1.3.6.1.4.1.13742.6.3.5.4.1.8 |
| outletSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
outletSensorDecimalDigits. For example, if the value is 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.5.4.1.9 |