circuitSensorLowerCriticalThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.11.4.1.21
Object
The lower critical threshold as an unsigned integer. The value of this OID variable should be scaled by circuitSensorDecimalDigits. For example, if the value is 1 and circuitSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled threshold exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.11.4.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- circuitSensorConfigurationEntry
- Table
- circuitSensorConfigurationTable
- Siblings
- 18
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| circuitSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSenso… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.11 |
| circuitSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSens… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.12 |
| circuitSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.13 |
| circuitSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.14 |
| circuitSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.22 |
| circuitSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSenso… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.23 |
| circuitSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.24 |
| circuitSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.11.4.1.25 |
| circuitSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.26 |
| circuitSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorD… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.27 |
| circuitSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.28 |
| circuitSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.29 |
| circuitSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.30 |
| circuitSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.31 |
| circuitSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.11.4.1.4 |
| circuitSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.11.4.1.6 |
| circuitSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.7 |
| circuitSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.9 |