circuitSensorEnabledThresholds
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.11.4.1.25
Object
column
r/w
Bits
A bit string indicating which thresholds are enabled. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.11.4.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- circuitSensorConfigurationEntry
- Table
- circuitSensorConfigurationTable
- Siblings
- 18
Syntax
Bits
Values & Constraints
Enumerated Values
0 | lowerCritical |
1 | lowerWarning |
2 | upperWarning |
3 | upperCritical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| circuitSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSenso… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.11 |
| circuitSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSens… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.12 |
| circuitSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.13 |
| circuitSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.14 |
| circuitSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSenso… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.21 |
| circuitSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.22 |
| circuitSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSenso… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.23 |
| circuitSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.24 |
| circuitSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.26 |
| circuitSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorD… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.27 |
| circuitSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.28 |
| circuitSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.29 |
| circuitSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.30 |
| circuitSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is 1 and
circuitSensorDec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.4.1.31 |
| circuitSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.11.4.1.4 |
| circuitSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.11.4.1.6 |
| circuitSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.7 |
| circuitSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
circuitSensorDecimalDigits. For example, if the value is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.4.1.9 |