pdug5OutletCurrentPercentLoad

PANDUIT-MIB · .1.3.6.1.4.1.19536.10.1.5.1.1.11
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Current percent load, based on the rated current capacity.  Units are
percentage, for example 80% will be returned as 80.  A negative
value indicates that this object is not available.

Context

MIB
PANDUIT-MIB
OID
.1.3.6.1.4.1.19536.10.1.5.1.1.11
Type
column
Access
readonly
Status
current
Parent
pdug5OutletEntry
Table
pdug5OutletTable
Siblings
20

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pdug5OutletIndex
Index for each outlet, value from 1 to the number of outlets per PDU.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.1
pdug5OutletActivePowerThUpperCritical
Upper critical threshold. Units are Watts(W). A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.10
pdug5OutletVA
A outlet VA value. Units are VA. A negative value indicates that this object is not available.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.12
pdug5OutletWatts
A outlet Watts value. Units are Watts. A negative value indicates that this object is not available.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.13
pdug5OutletWh
A Watt-Hour value for each outlet. Units are WH. This object is writable so that it can be reset to 0. When it is written to, the pdug5OutletWhTimer will be reset updated as wel…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.14
pdug5OutletWhTimer
Timestamp (date and time) of outlet Watt-hours was last reset.
columnOctetString.1.3.6.1.4.1.19536.10.1.5.1.1.15
pdug5OutletPowerFactor
An outlet PF value. Units are in hundredths, for example a power factor of 0.95 would be returned as 95, and 0.92 would be returned as 92. A negative value indicates that this o…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.16
pdug5OutletVAR
An outlet VAR value. Units are VAR. A negative value indicates that this object is not available.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.17
pdug5OutletBranch
The branch number outlet located.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.18
pdug5OutletActivePowerThResetThld
The Reset threshold is the number of watss the reading needs to fall below the threshold setting for the condition to be cleared. Units are watts.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.19
pdug5OutletName
A descriptive name for the outlet.
columnOctetString.1.3.6.1.4.1.19536.10.1.5.1.1.2
pdug5OutletActivePowerThChangeDelay
The number of consecutive sample that the condition is present before an alarm is raised.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.20
pdug5OutletActivePowerThCtrl
Outlet Active Power alarm threshold control: bit 0: up critical alarm control bit, 0 - enable, 1 - disable bit 1: up warning alarm control bit, 0 - enable, 1 - disable b…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.21
pdug5OutletType
Type of this outlet - C13, C19, 5-20R, iecC13/C15 COMBO, iecC13/C15/C19 COMBO...
columnEnumeration.1.3.6.1.4.1.19536.10.1.5.1.1.3
pdug5OutletCurrentRating
Rated current capacity of this outlet. Units are 0.01 amps. A negative value indicates that the hardware current capacity is unknown.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.4
pdug5OutletCurrent
A outlet current measurement value. Units are 0.01 amps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.5
pdug5OutletActivePowerThStatus
Status of the measured outlet active power relative to the configured thresholds.
columnEnumeration.1.3.6.1.4.1.19536.10.1.5.1.1.6
pdug5OutletActivePowerThLowerWarning
Lower warning threshold. Units are Watts(W). A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.7
pdug5OutletActivePowerThLowerCritical
Lower critical threshold. Units are Watts(W). A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.8
pdug5OutletActivePowerThUpperWarning
Upper warning threshold. Units are Watts(W). A negative value indicates that this object is not available.
columnInteger32.1.3.6.1.4.1.19536.10.1.5.1.1.9