optixSEPTCNotifyNum
OPTIX-SEP-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.8
Object
This node indicates the number of SEP nodes to be notified of the SEP TC. The value ranges from 0 to 8. Value 0 indicates that the SEP nodes are not notified.
Context
- MIB
- OPTIX-SEP-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixSEPConfigInfoEntry
- Table
- optixSEPConfigInfoTable
- Siblings
- 19
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixSEPID This node indicates the SEP protection ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.1 |
| optixSEPAuthenType This node indicates the SEP authentication mode. Value 0 indicates that no authentication is performed; value 1 indicates that the authentication password is encrypted by HMAC-SHA… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.10 |
| optixSEPAuthenPwd This node indicates the SEP authentication password. It is set to a null character string if no authentication is performed and to a character string of 1 to 64 bytes if the authe… | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.11 |
| optixSEPBlockMode This node indicates the SEP port blocking mode. Value 1 indicates that the port with the highest priority is the blocked port; value 2 indicates that an intermediate port in the S… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.12 |
| optixSEPBlockPortHop This node indicates the number of hops of the blocked port when the SEP port blocking mode is hop. This node is valid only when the block mode is hop and is set to 0xffff in other… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.13 |
| optixSEPBlockPortSysName This node indicates the system name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other sc… | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.14 |
| optixSEPBlockPortName This node indicates the name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other scenarios. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.15 |
| optixSEPName This node describes the SEP name. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.16 |
| optixSEPClearPKTCount This node indicates whether to clear packet statistics on an SEP port. Value 0 indicates that the packet statistics are cleared. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.17 |
| optixSEPAddVlanList This node indicates the SEP service VLAN ID list to add. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.18 |
| optixSEPDelVlanList This node indicates the SEP service VLAN ID list to be deleted. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.19 |
| optixSEPCtrVlan This node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.2 |
| optixSEPSetSysNameType Set a name type for the sep system. | column | Integer32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.20 |
| optixSEPSrvVlanNum This node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.3 |
| optixSEPSrvVlanList This node indicates the SEP service VLAN ID list. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.4 |
| optixSEPPreemtMode This node indicates the SEP preemption mode. Value 1 indicates the non-preemption mode; value 2 indicates the manual preemption mode; value 3 indicates the delay preemption mode. … | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.5 |
| optixSEPDelayTime This node indicates the SEP preemption hold-off time, in seconds. The value ranges from 15 to 600, and the step is 1. The default value is 15. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.6 |
| optixSEPTCInterval This node indicates the SEP TC hold-off time, in seconds. The value ranges from 1 to 10. The default value is 2. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.7 |
| optixSEPTCNotifyList This node indicates the list of SEP nodes to be notified of the SEP TC. | column | OctetString | .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.9 |