optixSEPBlockPortHop

OPTIX-SEP-MIB · .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.13
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This node indicates the number of hops of the blocked port when the SEP port blocking mode is hop. This node is valid only when the block mode is hop and is set to 0xffff in other scenarios.

Context

MIB
OPTIX-SEP-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.13
Type
column
Access
readwrite
Status
current
Parent
optixSEPConfigInfoEntry
Table
optixSEPConfigInfoTable
Siblings
19

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixSEPID
This node indicates the SEP protection ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.1
optixSEPAuthenType
This node indicates the SEP authentication mode. Value 0 indicates that no authentication is performed; value 1 indicates that the authentication password is encrypted by HMAC-SHA…
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.10
optixSEPAuthenPwd
This node indicates the SEP authentication password. It is set to a null character string if no authentication is performed and to a character string of 1 to 64 bytes if the authe…
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.11
optixSEPBlockMode
This node indicates the SEP port blocking mode. Value 1 indicates that the port with the highest priority is the blocked port; value 2 indicates that an intermediate port in the S…
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.12
optixSEPBlockPortSysName
This node indicates the system name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other sc…
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.14
optixSEPBlockPortName
This node indicates the name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other scenarios.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.15
optixSEPName
This node describes the SEP name.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.16
optixSEPClearPKTCount
This node indicates whether to clear packet statistics on an SEP port. Value 0 indicates that the packet statistics are cleared.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.17
optixSEPAddVlanList
This node indicates the SEP service VLAN ID list to add.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.18
optixSEPDelVlanList
This node indicates the SEP service VLAN ID list to be deleted.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.19
optixSEPCtrVlan
This node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.2
optixSEPSetSysNameType
Set a name type for the sep system.
columnInteger32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.20
optixSEPSrvVlanNum
This node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.3
optixSEPSrvVlanList
This node indicates the SEP service VLAN ID list.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.4
optixSEPPreemtMode
This node indicates the SEP preemption mode. Value 1 indicates the non-preemption mode; value 2 indicates the manual preemption mode; value 3 indicates the delay preemption mode. …
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.5
optixSEPDelayTime
This node indicates the SEP preemption hold-off time, in seconds. The value ranges from 15 to 600, and the step is 1. The default value is 15.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.6
optixSEPTCInterval
This node indicates the SEP TC hold-off time, in seconds. The value ranges from 1 to 10. The default value is 2.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.7
optixSEPTCNotifyNum
This node indicates the number of SEP nodes to be notified of the SEP TC. The value ranges from 0 to 8. Value 0 indicates that the SEP nodes are not notified.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.8
optixSEPTCNotifyList
This node indicates the list of SEP nodes to be notified of the SEP TC.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.9