optixL2LptPtpSwitchMode
OPTIX-L2-LPT-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.34
Object
column
Enumeration
This object indicates the switching mode of the L2 LPT.
Context
- MIB
- OPTIX-L2-LPT-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.34- Type
- column
- Access
- readonly
- Status
- current
- Parent
- optixL2LptEntry
- Table
- optixL2LptTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | strict |
1 | nostrict |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixL2LptRootType This object indicates the root parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.1 |
| optixL2LptPmpOamPeriod This object indicates the OAM period of the L2 LPT in the point-to-multipoint mode. Value range: 10 to 100 (unit: ms). The default value is 10. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.10 |
| optixL2LptPmpSwitchMode This object indicates the switching mode of the L2 LPT in the point-to-multipoint mode. 0: strict, 1: nostrict | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.11 |
| optixL2LptPmpEnable This object indicates the enable status of the L2 LPT in the point-to-multipoint mode. 0: disable, 1: enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.12 |
| optixL2LptAcDefect This object indicates the local user-side fault. 0: indicates that there is no fault. 1: indicates that there are faults. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.13 |
| optixL2LptNetDefect This object indicates the local network-side fault. 0: indicates that there is no fault. 1: indicates that there are faults. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.14 |
| optixL2LptRemoteDefect This object indicates the remote LPT instance fault. 0: indicates that there is no fault. 1: indicates that there are faults. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.15 |
| optixL2LptState This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.16 |
| optixL2LptPeerNetType This object indicates the protocol type of the remote L2 LPT. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.17 |
| optixL2LptPeerNetPara1 This object indicates the root parameter1 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the paramet… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.18 |
| optixL2LptPeerNetPara2 This object indicates the root parameter 2 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the pa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.19 |
| optixL2LptRootPara1 This object indicates the root parameter1 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.2 |
| optixL2LptPeerNetPara3 This object indicates the root parameter 3 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parame… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.20 |
| optixL2LptPeerVlanID This object indicates the Pass Vlan id of the L2 LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.21 |
| optixL2LptPeerBid This object indicates the Board ID of the L2 LPT. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.22 |
| optixL2LptPeerSubid This object indicates the Sub Board ID of the L2 LPT. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.23 |
| optixL2LptPeerPortid This object indicates the Port ID of the L2 LPT. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.24 |
| optixL2LptPtpCarryType This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.25 |
| optixL2LptPtpRowStatus This object indicates the row status of the L2 LPT. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.255 |
| optixL2LptPtpCarryIndex1 This object indicates the index 1 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is p… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.26 |
| optixL2LptPtpCarryIndex2 This object indicates the index 2 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.27 |
| optixL2LptPtpCarryIndex3 This object indicates the index 3 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is p… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.28 |
| optixL2LptPtpEnable This object indicates the enable status of the L2 LPT in the point-to-point mode. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.29 |
| optixL2LptRootPara2 This object indicates the root parameter 2 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.3 |
| optixL2LptPtpWtrTime This object indicates the WTR time of the L2 LPT in the point-to-point mode. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.30 |
| optixL2LptPtpDelayTime This object indicates the delay time of the L2 LPT in the point-to-point mode. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.31 |
| optixL2LptPtpOamType This object indicates the network fault detection mode of the L2 LPT. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.32 |
| optixL2LptPtpOamPeriod This object indicates the network fault detection period of the L2 LPT. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.33 |
| optixL2LptRootPara3 This object indicates the root parameter 3 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter typ… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.4 |
| optixL2LptPmpLeafType This object indicates the leaf parameter type of the L2 LPT in the point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.5 |
| ooptixL2LptPmpLeafNum This object indicates the number of L2 LPT leavesin the point-to-multipointmode. Value range: 0 to 16. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.6 |
| optixL2LptPmpWtrTime This object indicates the WTR time of the L2 LPT in the point-to-multipoint mode. Value range: 1 to 600 (unit: s). The default value is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.7 |
| optixL2LptPmpDelayTime This object indicates the delay time of the L2 LPT in the point-to-multipointmode. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.8 |
| optixL2LptPmpOamType This object indicates the OAM typeof the L2 LPT in the point-to-multipointmode. 0: IptOam, 1: pwOam | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.9 |