optixL2LptPeerNetPara3

OPTIX-L2-LPT-MIB · .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.20
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
This object indicates the root parameter 3 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is pw or qinq, it indicates the PW or QinQ index. If the parameter type is l2net, it indicates the channel ID of the virtual channel that passes through the third-party L2 network.

Context

MIB
OPTIX-L2-LPT-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.20
Type
column
Access
readonly
Status
current
Parent
optixL2LptEntry
Table
optixL2LptTable
Siblings
34

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixL2LptRootType
This object indicates the root parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.1
optixL2LptPmpOamPeriod
This object indicates the OAM period of the L2 LPT in the point-to-multipoint mode. Value range: 10 to 100 (unit: ms). The default value is 10.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.10
optixL2LptPmpSwitchMode
This object indicates the switching mode of the L2 LPT in the point-to-multipoint mode. 0: strict, 1: nostrict
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.11
optixL2LptPmpEnable
This object indicates the enable status of the L2 LPT in the point-to-multipoint mode. 0: disable, 1: enable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.12
optixL2LptAcDefect
This object indicates the local user-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.13
optixL2LptNetDefect
This object indicates the local network-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.14
optixL2LptRemoteDefect
This object indicates the remote LPT instance fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.15
optixL2LptState
This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.16
optixL2LptPeerNetType
This object indicates the protocol type of the remote L2 LPT. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.17
optixL2LptPeerNetPara1
This object indicates the root parameter1 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the paramet…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.18
optixL2LptPeerNetPara2
This object indicates the root parameter 2 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the pa…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.19
optixL2LptRootPara1
This object indicates the root parameter1 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.2
optixL2LptPeerVlanID
This object indicates the Pass Vlan id of the L2 LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.21
optixL2LptPeerBid
This object indicates the Board ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.22
optixL2LptPeerSubid
This object indicates the Sub Board ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.23
optixL2LptPeerPortid
This object indicates the Port ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.24
optixL2LptPtpCarryType
This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.25
optixL2LptPtpRowStatus
This object indicates the row status of the L2 LPT.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.255
optixL2LptPtpCarryIndex1
This object indicates the index 1 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is p…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.26
optixL2LptPtpCarryIndex2
This object indicates the index 2 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.27
optixL2LptPtpCarryIndex3
This object indicates the index 3 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is p…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.28
optixL2LptPtpEnable
This object indicates the enable status of the L2 LPT in the point-to-point mode.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.29
optixL2LptRootPara2
This object indicates the root parameter 2 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.3
optixL2LptPtpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-point mode.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.30
optixL2LptPtpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-point mode.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.31
optixL2LptPtpOamType
This object indicates the network fault detection mode of the L2 LPT.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.32
optixL2LptPtpOamPeriod
This object indicates the network fault detection period of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.33
optixL2LptPtpSwitchMode
This object indicates the switching mode of the L2 LPT.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.34
optixL2LptRootPara3
This object indicates the root parameter 3 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter typ…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.4
optixL2LptPmpLeafType
This object indicates the leaf parameter type of the L2 LPT in the point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.5
ooptixL2LptPmpLeafNum
This object indicates the number of L2 LPT leavesin the point-to-multipointmode. Value range: 0 to 16.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.6
optixL2LptPmpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-multipoint mode. Value range: 1 to 600 (unit: s). The default value is 1.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.7
optixL2LptPmpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-multipointmode. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.8
optixL2LptPmpOamType
This object indicates the OAM typeof the L2 LPT in the point-to-multipointmode. 0: IptOam, 1: pwOam
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.9