optixL2LptPeerNetPara2

OPTIX-L2-LPT-MIB · .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.19
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
This object indicates the root parameter 2 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type is pw, qinq or l2net, it takes an invalid value (4294967295).

Context

MIB
OPTIX-L2-LPT-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.19
Type
column
Access
readonly
Status
current
Parent
optixL2LptEntry
Table
optixL2LptTable
Siblings
34

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixL2LptRootType
This object indicates the root parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.1
optixL2LptPmpOamPeriod
This object indicates the OAM period of the L2 LPT in the point-to-multipoint mode. Value range: 10 to 100 (unit: ms). The default value is 10.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.10
optixL2LptPmpSwitchMode
This object indicates the switching mode of the L2 LPT in the point-to-multipoint mode. 0: strict, 1: nostrict
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.11
optixL2LptPmpEnable
This object indicates the enable status of the L2 LPT in the point-to-multipoint mode. 0: disable, 1: enable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.12
optixL2LptAcDefect
This object indicates the local user-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.13
optixL2LptNetDefect
This object indicates the local network-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.14
optixL2LptRemoteDefect
This object indicates the remote LPT instance fault. 0: indicates that there is no fault. 1: indicates that there are faults.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.15
optixL2LptState
This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.16
optixL2LptPeerNetType
This object indicates the protocol type of the remote L2 LPT. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.17
optixL2LptPeerNetPara1
This object indicates the root parameter1 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the paramet…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.18
optixL2LptRootPara1
This object indicates the root parameter1 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.2
optixL2LptPeerNetPara3
This object indicates the root parameter 3 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parame…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.20
optixL2LptPeerVlanID
This object indicates the Pass Vlan id of the L2 LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.21
optixL2LptPeerBid
This object indicates the Board ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.22
optixL2LptPeerSubid
This object indicates the Sub Board ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.23
optixL2LptPeerPortid
This object indicates the Port ID of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.24
optixL2LptPtpCarryType
This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.25
optixL2LptPtpRowStatus
This object indicates the row status of the L2 LPT.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.255
optixL2LptPtpCarryIndex1
This object indicates the index 1 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is p…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.26
optixL2LptPtpCarryIndex2
This object indicates the index 2 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.27
optixL2LptPtpCarryIndex3
This object indicates the index 3 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is p…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.28
optixL2LptPtpEnable
This object indicates the enable status of the L2 LPT in the point-to-point mode.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.29
optixL2LptRootPara2
This object indicates the root parameter 2 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.3
optixL2LptPtpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-point mode.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.30
optixL2LptPtpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-point mode.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.31
optixL2LptPtpOamType
This object indicates the network fault detection mode of the L2 LPT.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.32
optixL2LptPtpOamPeriod
This object indicates the network fault detection period of the L2 LPT.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.33
optixL2LptPtpSwitchMode
This object indicates the switching mode of the L2 LPT.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.34
optixL2LptRootPara3
This object indicates the root parameter 3 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter typ…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.4
optixL2LptPmpLeafType
This object indicates the leaf parameter type of the L2 LPT in the point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.5
ooptixL2LptPmpLeafNum
This object indicates the number of L2 LPT leavesin the point-to-multipointmode. Value range: 0 to 16.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.6
optixL2LptPmpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-multipoint mode. Value range: 1 to 600 (unit: s). The default value is 1.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.7
optixL2LptPmpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-multipointmode. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.8
optixL2LptPmpOamType
This object indicates the OAM typeof the L2 LPT in the point-to-multipointmode. 0: IptOam, 1: pwOam
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.9