optIfOTUkTraceIdentifierTransmitted

OPT-IF-MIB · .1.3.6.1.2.1.10.133.1.7.1.1.3

MIB view Table view

Object

column r/w OptIfTxTI

The trace identifier transmitted.
This object is applicable when optIfOTUkDirectionality
has the value source(2) or bidirectional(3).  It must not
be instantiated in rows where optIfOTUkDirectionality
has the value sink(1).
If no value is ever set by a management entity for this
object, system-specific default value will be used.
Any implementation that instantiates this object must
document the system-specific default value or how it
is derived.

Context

MIB: OPT-IF-MIB
OID: .1.3.6.1.2.1.10.133.1.7.1.1.3
Type: column
Access: readwrite
Status: current
Parent: optIfOTUkConfigEntry
Table: optIfOTUkConfigTable
Siblings: 13

Syntax

OptIfTxTI

Source: OptIfTxTI
Base type: OctetString

Values & Constraints

Type Constraints

range: 64

Related Objects

Sibling Objects

Object	Type	Syntax	OID
optIfOTUkDirectionality Indicates the directionality of the entity.	column	OptIfDirectionality	`.1.3.6.1.2.1.10.133.1.7.1.1.1`
optIfOTUkDEGM Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM consecutive bad PM Seconds are detected. This object is onl…	column	OptIfDEGM	`.1.3.6.1.2.1.10.133.1.7.1.1.10`
optIfOTUkSinkAdaptActive Indicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.11`
optIfOTUkSourceAdaptActive Indicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e., only when optIfOTUkDirectionality has the value …	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.12`
optIfOTUkSinkFECEnabled If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only applicable to the sin…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.13`
optIfOTUkCurrentStatus Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirec…	column	Bits	`.1.3.6.1.2.1.10.133.1.7.1.1.14`
optIfOTUkBitRateK Indicates the bit rate of the entity.	column	OptIfBitRateK	`.1.3.6.1.2.1.10.133.1.7.1.1.2`
optIfOTUkDAPIExpected The DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must…	column	OptIfExDAPI	`.1.3.6.1.2.1.10.133.1.7.1.1.4`
optIfOTUkSAPIExpected The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must…	column	OptIfExSAPI	`.1.3.6.1.2.1.10.133.1.7.1.1.5`
optIfOTUkTraceIdentifierAccepted The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It m…	column	OptIfAcTI	`.1.3.6.1.2.1.10.133.1.7.1.1.6`
optIfOTUkTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the …	column	OptIfTIMDetMode	`.1.3.6.1.2.1.10.133.1.7.1.1.7`
optIfOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectio…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.8`
optIfOTUkDEGThr Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that secon…	column	percentage OptIfDEGThr	`.1.3.6.1.2.1.10.133.1.7.1.1.9`