optIfOTUkDEGThr

Object

column r/w percentage OptIfDEGThr

Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad.  A PM Second is declared bad if
the percentage of detected errored blocks in that second is
              
greater than or equal to optIfOTUkDEGThr.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3).  It must not be instantiated in rows
where optIfOTUkDirectionality has the value source(2).
The default value of this object is Severely Errored Second
(SES) Estimator (See ITU-T G.7710).

Context

MIB: OPT-IF-MIB
OID: .1.3.6.1.2.1.10.133.1.7.1.1.9
Type: column
Access: readwrite
Status: current
Units: percentage
Parent: optIfOTUkConfigEntry
Table: optIfOTUkConfigTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
optIfOTUkDirectionality Indicates the directionality of the entity.	column	OptIfDirectionality	`.1.3.6.1.2.1.10.133.1.7.1.1.1`
optIfOTUkDEGM Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM consecutive bad PM Seconds are detected. This object is onl…	column	OptIfDEGM	`.1.3.6.1.2.1.10.133.1.7.1.1.10`
optIfOTUkSinkAdaptActive Indicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.11`
optIfOTUkSourceAdaptActive Indicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e., only when optIfOTUkDirectionality has the value …	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.12`
optIfOTUkSinkFECEnabled If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only applicable to the sin…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.13`
optIfOTUkCurrentStatus Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirec…	column	Bits	`.1.3.6.1.2.1.10.133.1.7.1.1.14`
optIfOTUkBitRateK Indicates the bit rate of the entity.	column	OptIfBitRateK	`.1.3.6.1.2.1.10.133.1.7.1.1.2`
optIfOTUkTraceIdentifierTransmitted The trace identifier transmitted. This object is applicable when optIfOTUkDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where op…	column	OptIfTxTI	`.1.3.6.1.2.1.10.133.1.7.1.1.3`
optIfOTUkDAPIExpected The DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must…	column	OptIfExDAPI	`.1.3.6.1.2.1.10.133.1.7.1.1.4`
optIfOTUkSAPIExpected The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must…	column	OptIfExSAPI	`.1.3.6.1.2.1.10.133.1.7.1.1.5`
optIfOTUkTraceIdentifierAccepted The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It m…	column	OptIfAcTI	`.1.3.6.1.2.1.10.133.1.7.1.1.6`
optIfOTUkTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the …	column	OptIfTIMDetMode	`.1.3.6.1.2.1.10.133.1.7.1.1.7`
optIfOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectio…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.133.1.7.1.1.8`

Object

Context

Syntax

Values & Constraints

Related Objects