optIfOTUkSinkFECEnabled
OPT-IF-MIB ·
.1.3.6.1.2.1.10.133.1.7.1.1.13
Object
If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The default value of this object is true(1).
Context
- MIB
- OPT-IF-MIB
- OID
.1.3.6.1.2.1.10.133.1.7.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optIfOTUkConfigEntry
- Table
- optIfOTUkConfigTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optIfOTUkDirectionality Indicates the directionality of the entity. | column | OptIfDirectionality | .1.3.6.1.2.1.10.133.1.7.1.1.1 |
| optIfOTUkDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM
consecutive bad PM Seconds are detected.
This object is onl… | column | OptIfDEGM | .1.3.6.1.2.1.10.133.1.7.1.1.10 |
| optIfOTUkSinkAdaptActive Indicates whether the sink adaptation function is activated or
not.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.7.1.1.11 |
| optIfOTUkSourceAdaptActive Indicates whether the source adaptation function is activated or
not.
This object is only applicable to the source function, i.e.,
only when optIfOTUkDirectionality has the value … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.7.1.1.12 |
| optIfOTUkCurrentStatus Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirec… | column | Bits | .1.3.6.1.2.1.10.133.1.7.1.1.14 |
| optIfOTUkBitRateK Indicates the bit rate of the entity. | column | OptIfBitRateK | .1.3.6.1.2.1.10.133.1.7.1.1.2 |
| optIfOTUkTraceIdentifierTransmitted The trace identifier transmitted.
This object is applicable when optIfOTUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows where op… | column | OptIfTxTI | .1.3.6.1.2.1.10.133.1.7.1.1.3 |
| optIfOTUkDAPIExpected The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must… | column | OptIfExDAPI | .1.3.6.1.2.1.10.133.1.7.1.1.4 |
| optIfOTUkSAPIExpected The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must… | column | OptIfExSAPI | .1.3.6.1.2.1.10.133.1.7.1.1.5 |
| optIfOTUkTraceIdentifierAccepted The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It m… | column | OptIfAcTI | .1.3.6.1.2.1.10.133.1.7.1.1.6 |
| optIfOTUkTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the … | column | OptIfTIMDetMode | .1.3.6.1.2.1.10.133.1.7.1.1.7 |
| optIfOTUkTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectio… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.7.1.1.8 |
| optIfOTUkDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that secon… | column | percentage OptIfDEGThr | .1.3.6.1.2.1.10.133.1.7.1.1.9 |