optIfODUkNimTIMDetMode
OPT-IF-MIB ·
.1.3.6.1.2.1.10.133.1.8.4.1.5
Object
column
r/w
OptIfTIMDetMode
Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function.
Context
- MIB
- OPT-IF-MIB
- OID
.1.3.6.1.2.1.10.133.1.8.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optIfODUkNimConfigEntry
- Table
- optIfODUkNimConfigTable
- Siblings
- 9
Syntax
OptIfTIMDetMode
- Source
- OptIfTIMDetMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | off |
2 | dapi |
3 | sapi |
4 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optIfODUkNimDirectionality Specifies the monitor point for the ODUk Path non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of optIfODUkDirectionality
has t… | column | OptIfSinkOrSource | .1.3.6.1.2.1.10.133.1.8.4.1.1 |
| optIfODUkNimRowStatus This columnar object is used for creating and deleting
a conceptual row of the optIfODUkNim config table.
It is used to model the activateNim and deactivateNim
operations of an OT… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.133.1.8.4.1.10 |
| optIfODUkNimDAPIExpected The DAPI expected by the receiver.
This object has no effect if optIfODUkNimTIMDetMode has
the value off(1) or sapi(3). | column | OptIfExDAPI | .1.3.6.1.2.1.10.133.1.8.4.1.2 |
| optIfODUkNimSAPIExpected The SAPI expected by the receiver.
This object has no effect if optIfODUkNimTIMDetMode has
the value off(1) or dapi(2). | column | OptIfExSAPI | .1.3.6.1.2.1.10.133.1.8.4.1.3 |
| optIfODUkNimTraceIdentifierAccepted The actual trace identifier accepted. The value of
this object is unspecified if optIfODUkNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if optIfO… | column | OptIfAcTI | .1.3.6.1.2.1.10.133.1.8.4.1.4 |
| optIfODUkNimTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.8.4.1.6 |
| optIfODUkNimDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad
if the percentage of detected errored blocks in that secon… | column | percentage OptIfDEGThr | .1.3.6.1.2.1.10.133.1.8.4.1.7 |
| optIfODUkNimDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
consecutive bad PM Seconds are detected. | column | OptIfDEGM | .1.3.6.1.2.1.10.133.1.8.4.1.8 |
| optIfODUkNimCurrentStatus Indicates the defect condition of the entity, if
any. The value of this object is unspecified if
optIfODUkNimRowStatus has any value other than
active(1). | column | Bits | .1.3.6.1.2.1.10.133.1.8.4.1.9 |