optIfODUkNimDEGThr

OPT-IF-MIB · .1.3.6.1.2.1.10.133.1.8.4.1.7
MIB view Table view

Object

column r/w percentage OptIfDEGThr 
Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad.  A PM Second is declared bad
if the percentage of detected errored blocks in that second is
greater than or equal to optIfODUkNimDEGThr.

Context

MIB
OPT-IF-MIB
OID
.1.3.6.1.2.1.10.133.1.8.4.1.7
Type
column
Access
readwrite
Status
current
Units
percentage
Parent
optIfODUkNimConfigEntry
Table
optIfODUkNimConfigTable
Siblings
9

Syntax

percentage OptIfDEGThr
Source
OptIfDEGThr
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 1..100

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optIfODUkNimDirectionality
Specifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of optIfODUkDirectionality has t…
columnOptIfSinkOrSource.1.3.6.1.2.1.10.133.1.8.4.1.1
optIfODUkNimRowStatus
This columnar object is used for creating and deleting a conceptual row of the optIfODUkNim config table. It is used to model the activateNim and deactivateNim operations of an OT…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.133.1.8.4.1.10
optIfODUkNimDAPIExpected
The DAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or sapi(3).
columnOptIfExDAPI.1.3.6.1.2.1.10.133.1.8.4.1.2
optIfODUkNimSAPIExpected
The SAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or dapi(2).
columnOptIfExSAPI.1.3.6.1.2.1.10.133.1.8.4.1.3
optIfODUkNimTraceIdentifierAccepted
The actual trace identifier accepted. The value of this object is unspecified if optIfODUkNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if optIfO…
columnOptIfAcTI.1.3.6.1.2.1.10.133.1.8.4.1.4
optIfODUkNimTIMDetMode
Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function.
columnOptIfTIMDetMode.1.3.6.1.2.1.10.133.1.8.4.1.5
optIfODUkNimTIMActEnabled
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.133.1.8.4.1.6
optIfODUkNimDEGM
Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM consecutive bad PM Seconds are detected.
columnOptIfDEGM.1.3.6.1.2.1.10.133.1.8.4.1.8
optIfODUkNimCurrentStatus
Indicates the defect condition of the entity, if any. The value of this object is unspecified if optIfODUkNimRowStatus has any value other than active(1).
columnBits.1.3.6.1.2.1.10.133.1.8.4.1.9